Search the forum,

Discuss what type of backing board is best in the DIY Tiling Forum area at TilersForums.com.

W

Waluigi

Drill the hole, push the plug in, knock the plug home with a screw, then screw the screw in.
 
W

Waluigi

This was done on a skimmed wall. Quite a few fixings.

The washers were recessed, filled with adhesive and the wall was then tanked.
4F674547-1C9F-49BE-BE0E-2D6C73D1D23E.jpeg
 
P

paul westcott

just a few more questions..when tanking it would you put the mesh tape over the fixings and brush the waterproofing coating on them? also what tanking product would you recommend i was leaning towards the Ardex wpc.
When tiling over plasterboard which is not tanked what would you use for the joints, similar to the backerboard tape the joint and feather over with tile adhesive
Many thanks
 

Reply to what type of backing board is best in the DIY Tiling Forum area at TilersForums.com

There are similar tiling threads here

Good morning all. After a little advice. I'll post pictures a bit later. However.... The...
Replies
6
Views
862
    • Like
Bathroom floor. I would be grateful for advice on how to prepare my bathroom sub floor ready for...
Replies
1
Views
488
Hi! I'm looking for some advice, I have laid some SLC (Mapei 1210) in our conservatory in...
Replies
5
Views
608
I had a small leak in the main water line before the stop tap in my 1950s house. The copper pipe...
Replies
1
Views
649
Hi all. Just wanting some advice and wondering what the pros in here are using nowadays for...
Replies
2
Views
591

Advertisement

New Tiling Questions

Replies you've not seen

Top