Universal Tile Sealer

[Lcfclcfc]

Has anyone used universal rapid all in 1 sealer, it states you can apply to damp tiles and grout which would speed up the job. Does anyone else seal the same day or do you do a moisture check on the tiles? Any sealer recommendations ? thanks

 

[Flintstone]

I haven't personally used it but resident nerd @impish highly rates it so I'm going to use it on my next job.

 

[One Day]

Apologies for not replying Local (I've been in Scotland, still no wi-fi!)
Yes, you can apply to wet / damp stone and grout. Slosh it all over, use as much as you like. Follow the directions and even if you leave residue, it can be cleaned off easily with a cloth soaked in the same stuff.
It's idiot-proof (why I use it) and very very good.
The new formulation doesn't even smell. The old one could knock you out!

 

[Dumbo]

Never seal and gro

Apologies for not replying Local (I've been in Scotland, still no wi-fi!)
Yes, you can apply to wet / damp stone and grout. Slosh it all over, use as much as you like. Follow the directions and even if you leave residue, it can be cleaned off easily with a cloth soaked in the same stuff.
It's idiot-proof (why I use it) and very very good.
The new formulation doesn't even smell. The old one could knock you out!

no wifi in Scotland ? Nicola sturgeon should say she's gonna sort that out in her manifesto

 

[Dumbo]

Just googled this and it says in the product description you can apply to damp stone immediately after installation and in the directions it says make sure the surface is completely dry and clean

 

[One Day]

Just googled this and it says in the product description you can apply to damp stone immediately after installation and in the directions it says make sure the surface is completely dry and clean

Well spotted!
And that's lazy cut n paste web page creation! Check the pdf instructions...
https://universealsealants.co.uk/wp...hnical-Application-Guide-RAPID-ALL-IN-ONE.pdf

 

[Lcfclcfc]

impish cant get the link what does guide say?

 

[hmtiling]

Used it on slate for the first time yesterday. Cleaned first coat and grouted in a day. Very impressed with drying times and grout release after.

 

[Lcfclcfc]

If it can be applied onto damp tiles and grout would save loads of time instead of waiting days for tiles to dry, you cant expect the customer not to walk on a stone kitchen floor for days until dry, i will be trying the rapid sealer out, anyone else tried it?