X
Xasper
Hello all, i have just had a new bathroom installed. The tiler has tiled the side and the foot of the bath however, the frame or the tiles at the foot of the bath are not flush with the bath overhang trim. They is about 1/4 inch lip between the tiles and the over hang if the bath and at the side the tiles are flush at one end and again are 1/4 inch shy of being flush. The tiler insists this to be normal for a bath to not be straight and to have this problem. I insisted it was the frame that must be too small but he stuck to his guns. Who is right here?
I hope ive explained myself ok for you guys to understand my predicament. Thank you
I hope ive explained myself ok for you guys to understand my predicament. Thank you