Posting a message to the forum will remove the above advertisement
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Checkout our Tilers Insurance area for awesome prices on Van Insurance and Public Liability Insurance for Wall and Floor Tilers

  3. Trade Tiler for Tiling Tools

    Before you post a new thread about manual tile cutters and which one to get, checkout the existing Manual Tile Cutter Threads.

Discuss Silicon Carbide discs, which grades to tidy up porc. edge? in the Tiling Tools Forum area at TilersForums.co.uk.

  1. Paul Giovanni Raimondi

    Paul Giovanni Raimondi Active Member

    Location:
    Serole. Italy
    Can anyone recommend which grades to start off with SiC discs on a grinder to tidy up a cut edge on porcelain tiles? Just to smooth the glazed edge when seen from the front.
    Thanks
     
  2. ATSDiamondTools

    ATSDiamondTools Official Member Support Company Support

    Location:
    Kent
    The most commonly used will be between 120 grit and 320 grit.

    320 is a stain finish, above that you're polishing.

    Below 120 you're shaping and grinding.
     
    • Informative Informative x 2
  3. Paul Giovanni Raimondi

    Paul Giovanni Raimondi Active Member

    Location:
    Serole. Italy
Loading...
Similar Threads - Silicon Carbide discs Forum Date
Any ideas please tiles stained from Ardex coloured silicone DIY Tiling Forum Oct 6, 2018
Adhesive Best mould resistant silicone Adhesive and Grout Forum Oct 1, 2018

Users found this page by searching for:

  1. silicone carbide grades

Find a Tiler Post a Job Tile Events Tile Pics Blog Adhesive Poll Handy Downloads