Recommended Cutter for 600 x 600 x 20mm garden porcelain pavers - Tile Advice

[Bickers]

Hi, new to forum but tiled a few DIY jobs for friends and family over the years.

Can anyone recommend a cutter - either wet or dry that will give me a clean cut on 20mm porcelain slabs?

I was initially thinking of going with a Rubi Evo 650 with a decent blade or the Vitrex bridge saw both around 800W with 200mm blades.

Now im thinking maybe a larger format dry cutter will suffice and also be suitable for other general ceramic / porcelain tiles.

One option is the Vitrex BRUTUS900 Clinker XL other than that i'm struggling finding something thats suitable for 20mm thick.

Thanks

Andrew

 

[Aaabbb]

I’d recommend hiring a wet saw , a manual cutter is unlikely to get every cut perfect.

 

[Bickers]

I’d recommend hiring a wet saw , a manual cutter is unlikely to get every cut perfect.

Thanks, Im going to try and pickup a Rubi DU-200 Evo with an ATS disc

 

[Rae]

Rubi tz is the best bet snaps 20 mm porcelain ,but cheaper option is 9 inch angle grinder ,clamp a bit of 2x1 timber to your line you want to cut , then run angle grinder down line

 

[Bickers]

Thanks, was looking at the TZ its impressive but a bit out of my price range for a few DIY jobs.

Grinder it is - would i get away with a 125mm? I have both so will just need a decent disc.

 

[Rob]

Thanks, was looking at the TZ its impressive but a bit out of my price range for a few DIY jobs.

Grinder it is - would i get away with a 125mm? I have both so will just need a decent disc.

I used a 9 inch angle grinder , if you scribe the line, it gives a decent cut.