primer

[stevee]

hiya peeps,just been to price a job ,old trav tiles on a concrete floor

he dosent want them takin up,nor do i

would SBR bond be ok after cleaning,then tile,cheers steve

 

[jay]

sorry i would remove them:8:

 

[White Room]

Why dos'nt he clean them if there grubby

 

[stevee]

hiya jay ,why would u remove them mate ? theres no hieght issue ,its a solid concrete floor? been down a long time?

wb, he says he`s fed up with with trying to keep em clean,

so any input on the primer lads?

 

[jay]

i take it trave was sealed with something :8:

 

[stevee]

who knows , its been down a long time, tapping it allover with the handle of my lump hammer its as solid as a solid thing tho

i might give it a go with grimex then when dry sbr bond,cheers mate

 

[jay]

problem being if sealed and you tile over it will seperate as the sealer is to stop penetration which a primer needs to do so you run a risk of failure so to do job right with no comebacks best to remove as tiling over sealers is the same as tiling over paint not recomended good luck:8:

 

[Rufus Roughcut]

sugar soap em down to remove old grease dirt and stuff, there is no need to prime at all unless they are very porus like cotta ?

Rufus