Need a new grinder blade.

[Old Mod]

@ATSDiamondTools
Here's yours Alan.

 

[Concrete guy]

That's the one.

We've had a few hundred of each size made for stock and we're going to see how people get on with them.

If they sell well we'll put a bigger order in and see what other sizes are available. This design doesn't seem to scale up well though, so it's unlikely we'd be getting anything above 180mm.

 

[Old Mod]

Comparison
Your blade does look damaged antonio

 

[Italy]

Comparison
Your blade does look damaged antonio
View attachment 85569 View attachment 85570

It is the profile that is not nice round

 

[Concrete guy]

It looks like one of the test blades was poorly moulded.

We'll take a look at the stock when it arrives early this week.

 

[J Sid]

Sure he mentions red are pro range, but not sure if tested.
So I might change my mind if others want green Geoff.

you saying we are not pro's anymore

 

[J Sid]

We'll have these in stock later this week in 115mm or 125mm.

The red one of this design recently tested by a few members. Although I think I asked for ours to be painted blue, I can't remember without checking in the office.

been using the test one every day and has handled everything I've tried with flying colours, and no sign of wearing down at all. If it ever does, I will be buying another

 

[Qwerty]

In that case @ATSDiamondTools .....I will wait until you have stock and buy a couple of yours. Did you say yours is the equivalent of the green or red? & what is the difference between the two?

 

[Old Mod]

you saying we are not pro's anymore

 

[Concrete guy]

been using the test one every day and has handled everything I've tried with flying colours, and no sign of wearing down at all. If it ever does, I will be buying another

Well that's good and not so good. I don't want to be selling the blade equivalent of the everlasting light bulb!