It’s New tools tuesdays - TilersForums.com

[GoneGuy]

PROFESSIONAL Mixing Paddle 160 x 750mm M14 Thread Mixer, Stirrer, Painted P89 | eBay - https://www.ebay.co.uk/itm/PROFESSIONAL-Mixing-Paddle-160-x-750mm-M14-Thread-Mixer-Stirrer-Painted-P89-/152101152147

My old mixer was in its last legs and struggling to mix plus the trigger is broken

 

[Cranbrook]

Was just writing my Christmas list to santa and was about to write down a 40cm stabila spirit level, but suddenly came across this...

Stabila 96-2 Electronic Level 40cm 16361 - https://www.mytoolshed.co.uk/stabila-96-2-electronic-level-40cm-16361.html

Anyone own, used or come across one? Looks the business

 

[Waluigi]

Well, I have always used sigma pads € 19 per piece.
these cost less, but the difference on sight is enormous.
these are very rough, sigma were more polished.
I'll try .... as always I do the guinea pig.

I have a set of these pads from the same place. Not really tried them properly. Polished up some Quartz about a month ago but not used them since.

 

[Cranbrook]

I have a set of these pads from the same place. Not really tried them properly. Polished up some Quartz about a month ago but not used them since.

View attachment 100818

Are the prices on that website genuine? In having trouble believing it can be true

 

[Waluigi]

Yes.

 

[Flintstone]

My paddle is 1200 long ! Made life easier when I got that

 

[Italy]

.....

 

[Flintstone]

Mamma Mia, I thought you were above buying Chinese Antonio

 

[Italy]

.....

View attachment 100885

perplexed ... and now ... very confused ... all my securities broken in a 5/6 € Chinese blade... at midday I report

 

[Waluigi]

perplexed ... and now ... very confused ... all my securities broken in a 5/6 € Chinese blade... at midday I report

View attachment 100894

 

[Waluigi]

Next to my Bosch. Laser line is spot on. Nice clean line.

Bit disappointed with the lack of adjustment on the magnetic clamp. Need to have a proper look though as I might’ve missed something.

 

[Italy]

perplexed ... and now ... very confused ... all my securities broken in a 5/6 € Chinese blade... at midday I report

View attachment 100894

this morning I had to make 18 dry cuts, I used black Chinese, I was thinking of doing Max 2 cuts instead of finished all the cuts, with a few chips, sincerely speaking it is the best

 

[Italy]

this morning I had to make 18 dry cuts, I used black Chinese, I was thinking of doing Max 2 cuts instead of finished all the cuts, with a few chips, sincerely speaking it is the best

I do not know if you understand what I wrote. (no translator)
20mm of dry cut porcelain ... not all blades can.
this Chinese black succeeds !!!
without slowing down or overheating. and without chip
I can not wait to try it with 10mm.

 

[Concrete guy]

I do not know if you understand what I wrote. (no translator)
20mm of dry cut porcelain ... not all blades can.
this Chinese black succeeds !!!
without slowing down or overheating. and without chip
I can not wait to try it with 10mm.

This is interesting. I've asked our guy in China to find out who makes it. I have a feeling I know which factory it's from.

 

[Waluigi]

Just ordered a couple of those blades and a couple of other blades. It’s not all great stuff. The vanity blades are too rough IMO