I bought a dewalt d24000. Why you sell yours!

[average]

bolted tight, but sounds like one is out. Take tray of and put a straight edge on them, may show which is of

How can one be out if mine are all bolted tight! If one is lose, I can understand but with them all tight, something not right!

 

[average]

For anyone saying no need for the dewalt because can dry cut, how accurate can you get it with grinder. TBH, I've never tried cutting with one. I always imagined I wouldn't get it perfect with a grinder like I would with a dewalt!

 

[Kyle Knowles]

I've read the instructions! The wheels are all on. Id I go messing about with them, sure won't I knock it out of line. Say if I loosen the wheels from not tight, surely the tray could end up 1 or 2mm out!

Does anyone wheels move from side to side or are they bolted tight with wheels still moving. All mines are bolted tight to the frame.

It's the track u adjust not the wheels mine had the same problem as yours and I spoke to dewalt and they had me sit with the detailed drawing and talked me through what to do its easy and takes 2 mins

 

[Gonzo1969]

Under the Dewalt new purchase guarantee you can return or exchange within 30 days if unhappy.

Exchange it mate. Simples!!

 

[Kyle Knowles]

There's nothing wrong with it apart from lack of understanding the machine and how it's adjustable

 

[Kyle Knowles]

Adjustments - Dewalt D24000 Instruction Manual [Page 11] - http://www.manualslib.com/manual/39497/Dewalt-D24000.html?page=11

 

[Kyle Knowles]

Clearly explained adjusting the rolling resistance of the tray

 

[average]

There's nothing wrong with it apart from lack of understanding the machine and how it's adjustable

I've been at it an hour and still not aligned!

Pic 1 is how much I've brought the rod away from its original position. See the clear part where tip of screwdriver is. About 10mm easy and still nothing.

Pic 2 is the saw standing upright while taking the pic. This is what I tightened up to try and bring it inline! This is while I've loosened all 4 top screwbolts! Even the sliding table with t slide down the rails while it's standing up.

Over 1000€ and this carry-on. Very disappointed at dewalt for this! SHOCKING!

 

[average]

 

[widler]

For anyone saying no need for the dewalt because can dry cut, how accurate can you get it with grinder. TBH, I've never tried cutting with one. I always imagined I wouldn't get it perfect with a grinder like I would with a dewalt!

Good blade and steady hand and its easy (apart from mondays, i never have a steady hand on a monday)