Search the forum,

Discuss Help on a bad tile job in the Canada Tile Advice area at TilersForums.com.

Reaction score
0
Points
36
Location
Bury
EEE140C7-5218-4E87-9099-E399E7DF4892.jpeg

Hi first time poster here

I’ve just had my kitchen floor tiled and the tile lippage on a number on the tiles exceeds BS I’ve attached a couple of pictures where I’ve measured the gap with a level and steel rule. If anyone can provide any advice I reckon over the floor approx 40 out of 125 tiles have excess lippage


also a large amount of the grouting has air bubbles and lumps in it

Any advice would be greatly appreciated
EEE140C7-5218-4E87-9099-E399E7DF4892.jpeg



A00D69C6-6AE7-455C-96E6-129AFFEB2404.jpeg
EEE140C7-5218-4E87-9099-E399E7DF4892.jpeg

84A217F2-1FD6-4A67-BA98-C577E46387F0.jpeg
0F624959-81E2-47F1-91EC-C731D4134DF7.jpeg
 

Attachments

  • 8F16A164-9B8A-470F-9D7A-8608C864E3A3.jpeg
    520.7 KB · Views: 21
Reaction score
0
Points
36
Location
Bury
Hi have you spoke to the fixer about the issues , something gone very wrong with the grout with bubble in it like that
In discussion at the moment they are suggesting patching the grout and lifting and relaying the tiles but given how many are uneven we have concerns about that.
 

Reply to Help on a bad tile job in the Canada Tile Advice area at TilersForums.com

There are similar tiling threads here

I had a small leak in the main water line before the stop tap in my 1950s house. The copper pipe...
Replies
1
Views
656
Hi! I'm looking for some advice, I have laid some SLC (Mapei 1210) in our conservatory in...
Replies
5
Views
619
Good morning all. After a little advice. I'll post pictures a bit later. However.... The...
Replies
6
Views
879

Advertisement

New Tiling Questions

Replies you've not seen

Top