Has anyone got a proxxon kgs 80 for cutting trims

[Joshjupp]

Me too!! 😀😀

I’ll find the link for you mate
[automerge]1578678802[/automerge]

Cut off/mitre saw KGS 80

Cut off/mitre saw KGS 80

www.hobbytools-direct.com

 

[demi34]

I have been using this Kgs 80 for 4 years now and it’s good little machine.

 

[Cranbrook]

There’s a few guys Josh, and everyone who has one rates it.
But then at around £300 they should be. 😊

But then you know mitres are the way to go 🤣

Marc are you still using the electroplated disc for your mitres or are you using polishing pads these days?

 

[Old Mod]

Marc are you still using the electroplated disc for your mitres

Yes, they’re still my preferred method for polishing mitres.

 

[Geoff Thacker]

I bought a evolution chop saw and stand with a multi function blade (around £120 from Screwfix) if you have the room to set it up for the duration of the job it’s great as it cuts everything and leaves a great mitre

 

[Boggs]

I bought a evolution chop saw and stand with a multi function blade (around £120 from Screwfix) if you have the room to set it up for the duration of the job it’s great as it cuts everything and leaves a great mitre View attachment 111935

Just got to mind the old digits!

 

[Geoff Thacker]

Just got to mind the old digits!

😂 aye it can give you a wee shock occasionally

 

[acaciaguy]

What blades are you guys using to cut metal trim. I have heard of people using fibre disks. I’m struggling to find blades with more than 64 teeth or the fibre disks. Any good sources ?

 

[Steve6690]

Cut off/mitre saw KGS 80

Cut off/mitre saw KGS 80

www.hobbytools-direct.com

 

[acaciaguy]

Thank you very much Steve. Any idea of the finish the fibre disk gives on metal trim?