J
Jimmy Boy
Been to a ladies flat today, sister of a freind. She bought this flat and it has an additional single lavatory. Flat was empty for 10 months.
The walls of lavatory have been tiled but not grouted. Obviously a diy job as it was not set out correct but the tiling is fairly passable all for one corner that is not 90deg but more like *60degrees?!?! (*see below), between the door frame and this corner that is about 3inches. Waste tiles have been used to fill this area and the cuts are very out, leaving a downward grout line that is all over the place. What is the widest silicone spread you would use and how would you silicone a corner that is not 90deg as below ?
* If your normal internal corner was like the hands of a clock at 3o'clock then this corner is more like 5 o'clock
Thanx Jimbo
The walls of lavatory have been tiled but not grouted. Obviously a diy job as it was not set out correct but the tiling is fairly passable all for one corner that is not 90deg but more like *60degrees?!?! (*see below), between the door frame and this corner that is about 3inches. Waste tiles have been used to fill this area and the cuts are very out, leaving a downward grout line that is all over the place. What is the widest silicone spread you would use and how would you silicone a corner that is not 90deg as below ?
* If your normal internal corner was like the hands of a clock at 3o'clock then this corner is more like 5 o'clock
Thanx Jimbo