External tiling onto a new concrete slab

[llevram]

Hello all, I have a job coming up to install 20mm thick porcelain large format tiles onto a freshly laid concrete slab (once cured)

Looking for some advice on the following....

1. How long from the day the concrete is poured until you can tile ?

2. I've done this many times in Australia but as climate and weather is a lot different here I can only assume the prep work must be too.... what's the method for sealing the slab?
As in what primer/waterproofing agent do people use in England than coinsides with the English climate?

3. Any other advice anyone's willing to add would be very much appreciated.

Thanks in advance

 

[LM]

Our guidelines are 6 weeks for a 100mm slab at 20 degrees Celsius as an average.
The surface should be abraided by scrabbling etc to remove the laitanance.
With our climate you should factor in dispersion of water with the inclusion of a system such as Schluter Ditra Drain 8 etc.
An on site specification from your adhesive supplier would be advisable for this project, most reputable manufacturers will provide this for free.

 

[llevram]

Cheers for your advice.

The concrete slab has aco drains around the outside which is connected to a soak away.

Would you recommend a liquid Dpm to be applied to the slab before
Tiling?

Also can SLC be applied over the top of the dpm or does that have to be applied first?

Thanks

Our guidelines are 6 weeks for a 100mm slab at 20 degrees Celsius as an average.
The surface should be abraided by scrabbling etc to remove the laitanance.
With our climate you should factor in dispersion of water with the inclusion of a system such as Schluter Ditra Drain 8 etc.
An on site specification from your adhesive supplier would be advisable for this project, most reputable manufacturers will provide this for free.

 

[Tommythetiler80]

Hi , just Done a job where I black jacked dpm a concrete base and SLC over the top so it is fine to do. Just mix dpm 6:1 for a primer base then a neat coat over that . Then before SLC prime with a sbr first coat 3:1 then follow with a neat coat. Always Advisable to call techies for whatever products you may use though.

 

[Tommythetiler80]

 

[Old Mod]

I black jacked dpm a concrete base and SLC over the top


Then before SLC prime with a sbr first coat 3:1 then follow with a neat coat.

What slc did you use Tommy?

 

[Dumbo]

You would need an exterior grade latex such as ardex k301

 

[hmtiling]

Ditra drain or use the pedestals for me. Bal acrybase and rocatex xl500 are a couple more external grade levellers.

 

[Old Mod]

You would need an exterior grade latex such as ardex k301

Yeah cheers JC, I know what I would use, just curious as to what Tommy did.
Thanks.

 

[hmtiling]

https://www.tilefixdirect.com/category/pedestals