Edging is not level with Tile

[AndyR]

Hi Everyone,

I had a contractor in to do some renovations and although he told me he was good at tile, I unfortunately have been left with some issues after the fact.

See attached pictures, the metal edging he used is not level with the top edge of the tile. Also, some of the tiles on the face of the stair protrude out past the edge. The tiles have not been grouted yet, but they have been laid down for a few days.

Any tips on how to adjust the edging or am I stuck with removing tiles along the edge and replacing the edging and the tiles?

Thanks,

Andy

 

[Rich Midge]

I'm afraid you're stuck with replace and redo. That looks pretty bad.

 

[White Room]

To be honest the edging may not be the only problem, do you have any more pictures for a wider view...

 

[One Day]

oh dear oh dear oh dear...

 

[Dan]

That looks terrible.

The edging doesn't look like it was made for the job there. You needed something much bigger. Those tiles look too thick for it.

But what's going on with the cuts too?

You should have really got an actual wall and floor tiler in to do it. The 'contractor' you've got doesn't know what he's doing by the looks of it.

 

[Dan]

This is edging.

Calacatta Bookmatch by Porcel-Thin™ - http://www.tilersforums.com/media/calacatta-bookmatch-by-porcel-thin.14381/

 

[One Day]

Tiling staircases is pretty specialist work. Out of interest, what has he tiled onto? Please don't say just the bare treads and risers!

 

[Chalker]

Oh dear!
It's not straight.,
The trim is too small.!
It's not in one piece.!
The cuts ar terrible.!
Apart from that, I like the tiles.......

 

[AndyR]

Bahaha, Yeah its pretty ugly. I was alarmed. I'm pretty sure he had never done stairs before. Yes, its tiled onto bare treads and risers

The issue is that the treads are too wide for one piece of trim, they are something like 10'6" long.

I'm thinking I'll be calling a new tile guy and getting out my sledge hammer.

 

[White Room]

Bahaha, Yeah its pretty ugly. I was alarmed. I'm pretty sure he had never done stairs before. Yes, its tiled onto bare treads and risers

The issue is that the treads are too wide for one piece of trim, they are something like 10'6" long.

I'm thinking I'll be calling a new tile guy and getting out my sledge hammer.

Is that timber.....