Search the forum,

Discuss Damage Control - advice needed in the DIY Tiling Forum area at TilersForums.com.

Ravsta

TF
DIY Tiler
Reaction score
0
Points
36
Location
West Midlands
Hi

First time on here, new to DIY and have my first challenge:
Decided to floor tile our first property and having done so with hardie backer boards and Lauara Ashley Dove tiles.
The floor had slight movement in certain areas, so we nailed down floorboards as secure as possible without me messing with the wooden beams below the floor. Also when tiling I decided to apply adhesive onto the back of the tile rather than the floor as I didn't want adhesive coming through the gaps (as wanted tight finish without grouting). Realized after it would look better grouting, so grouted it....(poor planning all round, not enough research done I know...never again will I make this mistake with DIY)

To cut the long story short having tiled and grouted, now some of the grout keeps cracking and coming out on certain tiles.

What do you suggest my plan to manage these tiles going forward ? Should I leave constant re-grouting, allow the tiles to break if they do and replace if they do ? or should I start ripping up the tiles which I really don't want to do.

Any advice here would be much appreciated - I can attach photos late if necessary
 

Lou

Admin
Staff member
Esteemed
Reaction score
865
Points
1,473
Location
Staffordshire
Welcome to the forum, our members will be able to offer advice to you. Can you post some photos?
 
D

Dumbo

Probably your grout is sat on top of tiles rather than in the joint is one reason it could be cracking also I expect your tiling technique didn't promote proper adhesion to the hardy so may be letting go . Suggest you take one up to have a look
 
Reaction score
57
Points
243
Location
Southampton
Full strip out and needs to be re done I’m afraid. Unfortunately with these things, we train for many years in subfloor preparation, tile fixing techniques and suitable products to use and that knowledge can’t be learned and applied easily on a DIY job. I’m not saying it can’t be done, it just takes a lot of research to do it properly when it’s not your forte. Pop a few tiles up and show us what you have. Sounds like a lot of movement.
 

Reply to Damage Control - advice needed in the DIY Tiling Forum area at TilersForums.com

There are similar tiling threads here

    • Like
Bathroom floor. I would be grateful for advice on how to prepare my bathroom sub floor ready for...
Replies
1
Views
527
Good morning all. After a little advice. I'll post pictures a bit later. However.... The...
Replies
6
Views
911
I had a small leak in the main water line before the stop tap in my 1950s house. The copper pipe...
Replies
1
Views
667
Hi! I'm looking for some advice, I have laid some SLC (Mapei 1210) in our conservatory in...
Replies
5
Views
644
Hi all. Just wanting some advice and wondering what the pros in here are using nowadays for...
Replies
4
Views
676
Please visit our sponsor websites, they keep the forum free to use!

Advertisement

New Tiling Questions

Replies you've not seen

Top