Search the forum,

Discuss Contour disabled access shower doors in the Tanking and Wetrooms area at TilersForums.com.

Hi all.
Fitting contour disabled access half height , bi fold shower doors for parents.
Lining up with shower tray and there's no joist where the U metal compensator needs to be fixed to tile on pb wall.
Instructions say drill hole with 10 masonry bit and use wall plugs supplied.
Screws are 8 X 50mm
The door is bifold ( aluminium frame with obscure plastic ( not glass) inset about 900mm in total with central bifold .
Issue apart from lack of joist is that the tiles are smallish and laid in an offset pattern ( metro style) and they aren't absolutely level.
Its fixed, and screws are tight, but when you open the doors ( especially both , as opposed to just the one furthest from the hinge) rather than just the hinge moving, the compensator is moving slightly.

Would a different fixing be the answer, or should we try to level the wall behind the U compensator somehow, eg double sided adhesive foam, silicone?
Contour Showers | Disabled wetroom specialists - Welcome to Contour Showers - https://www.contour-showers.co.uk › ...PDF
Shower Door Fitting Instructions
Something like these?
https://www.NoLinksToThis/p/fischer-duopower-wall-plugs-10-x-50mm-50-pack/5424p
 
Last edited:

Reply to Contour disabled access shower doors in the Tanking and Wetrooms area at TilersForums.com

There are similar tiling threads here

  • Poll
Hi, I have a small en-suite 1200 x 2400, with a 1200 x 900mm linear drain tray which will have...
Replies
6
Views
1K
10 Tiling Tips for Fixing Tiles to Bathroom Walls = From UKTilingForum.co.uk There are a few...
Replies
1
Views
808
I had a small leak in the main water line before the stop tap in my 1950s house. The copper pipe...
Replies
1
Views
754
Hi! I'm looking for some advice, I have laid some SLC (Mapei 1210) in our conservatory in...
Replies
5
Views
729

Advertisement

Replies you've not seen

Top