Discuss Dry drills for angle grinder in the Canada area at TilersForums. The USA and UK Tiling Forum (Also now Aus, Canada, ROI, and more)
Maybe I'm a bit late to the party but to those of you that haven't tried these yet you should do as I've drilled 10 mm porcelain in under 20 seconds with a 25 mm hole . The make I'm using is Mexco although I understand ATS products are much liked . Time easily outweighs cost .
yes you are very late to the party,
yes you are very late to the party,
Ahah, crazy julian.
I,They are over the party
Still know tilers that haven't got in their cars yet to leave for the party
as you say, so much quicker and the ats bit are a good price
I'm still on the drill ones, do you go outside to cut them and do you have a seperate grinder? Is the cut as clean ?
I'm still on the drill ones, do you go outside to cut them and do you have a seperate grinder? Is the cut as clean ?
No, cut as clean with drill and water. just slower...for me
I'm still on the drill ones, do you go outside to cut them and do you have a seperate grinder? Is the cut as clean ?
Just get one and try it . They make a bit of dust but don't tend to throw it every like cutting a tile with angle grinder.
I'm still on the drill ones, do you go outside to cut them and do you have a seperate grinder? Is the cut as clean ?
can be a clean cut and dust free. I hold a damp/wettish sponge against the bit which reduces the dust and chipping, and I have a separate grinder for the job and do it indoors.
get one and try it, use as above and you'll be converted
II passed by diamond cutters grinder, a drill cutters, many years ago.
I never felt comfortable with grinder.
I prefer the drill with water and cutters sigma, slower cutting but for many years.
I can see the benifit if you have a real load of holes to drill in one job, but I'm not in a mega rush to save 2 mins!
I can see the benifit if you have a real load of holes to drill in one job, but I'm not in a mega rush to save 2 mins!
It's not just about time Andy, it's actually much easier to use a grinder.
There's no dust to speak of really.
But the real advantage is that your hand is very close to the actually drill bit, which means it's easier to control, a lot easier.
With a drill you need to be sure it's vertical and so on. Using a grinder your hand is just a couple inches away which is a lot easier and they are far more less likely to skate like a drill bit.
Trick is to slightly rock your hand in a circular motion and not just push straight down. This makes them far more efficient and increases the life 10 fold.
I'll add a couple to my order when I next order some blades!
I use these daily on site protiler have there own cheap brand you can also grab an adapter for putting them into a drill as 3 fall said so much more controll I think adding a bit of water is a good idea sometimes you can make them glow on johnsons tiles and they crack, burnt a new build floor once haha
Mounting these drill bits in a drill makes the process slower as drills have less rpm than grinders
Reply to Dry drills for angle grinder in the Canada area at TilersForums.com
Or checkout our tile courses and training forum or the Tile Blog / Latest Blog Posts
Please note that this thread is old so replying to it may not get a response. You'd be best posting a new thread with a good 4 or 5 word title.