wedi shower floor.............

[Italy]

question.
In my last job I found this wedi shower floor.
first time i see wedi, i've done a couple of schluter before
but it was also on the walls.
here, the walls are sand and cement and I have to impermealize.
how should I behave with the connection between walls and floor panel?
just a band glued between the wall and the panel?
or do I have to do anything else?
unfortunately here we are still primitive with these products, already find a wedi panel
and not having to make sand and cement on the floor is new.
thanks

 

[Flintstone]

You just bond the joints together with the wedi sealant and smooth over the excess Antonio, that’s there system.

 

[Italy]

the wedi sealant does not exist here. the plumber
told me that I have to know what to do, he does not know anything. (idiot).
plumber has laid the panel and does not know the procedure.

 

[Flintstone]

You could always seal the joints with tape and paste same as other brands of XPS board, that must be available over there ?

 

[Italy]

the adhesive to seal the joints with ditra is not good?
adhesives for xps board, schluter exists here, but would not know where to buy.

 

[Albert]

Schluter System - Meinardi - https://www.meinardi.it/en/partner/schluter-system-2/
is this any help Antonio

 

[Italy]

I visited the schluter site, from what I understood
KERDI-COLL for ditra and for xps board.
That adhesive you have available.
thank you all

 

[GoneGuy]

Use the kerdi Coll to bond the tape

 

[Dumbo]

the wedi sealant does not exist here. the plumber
told me that I have to know what to do, he does not know anything. (idiot).
plumber has laid the panel and does not know the procedure.

View attachment 99912

Nice to know plumbers are the same everywhere.

 

[Old Mod]

You could use Ardex WPC to make waterproof joints Antonio.
Is the same as Kerdi Coll.