Metal mosaics

[Old Mod]

Isomat s AK25 John, standard set S2
Even in this weather, if you spin it up now and again, easily get 3-4hrs pot life.
Or if you want bottle and bag their one is standard set too. Megalastic I remembered.
[automerge]1562568103[/automerge]
......also
I believe Porcelanosa make a range of metal mosaic that are NOT designed to be cut, think it’s more designed to be a feature tile. Maybe worth enquiring John.

 

[Time's Ran Out]

Today will decide.
@3_fall I believe these mosaics are that small that they won’t be cut.
And the best adhesive available to me up in the outer ranges of Tiling land will be -


Thanks everyone - if I can do a decent job I will post a picture.
[automerge]1562587098[/automerge]


Lunch and half wall done.
[automerge]1562602751[/automerge]


A few cuts to the ceiling then that wall is done.
Tomorrow a niche and grout the 1200x600 in.

 

[Time's Ran Out]

Couple of pictures of the completed wall.
The joints opened up in a few places on the backing mesh and I didn’t cut any tiles!
So I mixed up some translucent epoxy with silver glitter and finger pointed into any gaps - got away with it. On top of getting paid off the builder, his customer supplied a £50 voucher to one of our favourite eateries as a thank you!


Voucher spent on Thursday!
Now where’s my next meal coming from?

 

[WetSaw]

Fair bit of lippage there TJ

 

[Time's Ran Out]

Fair bit of lippage there TJ

You should see the other walls 1200x600x12mm porcelain on my own!

 

[WetSaw]

You should see the other walls 1200x600x12mm porcelain on my own!

Not surprised you got thrown off that bathroom job, getting right sloppy in your old age

 

[Sean Kelly]

Oh, I take it the niche was not tiled in those tiles?

Looks great John.

 

[Time's Ran Out]

Oh, I take it the niche was not tiled in those tiles?

Looks great John.

Just the back wall of the niche!