Search the forum,
Discuss Marble bullnose grinding wheel in the Tiling Tools | Tile Tools - Tile Installing Tools area at TilersForums.com.
S
Spud
ATS bull nosing grinder wheel
As Gary says the ATSbull nosing wheel is a great piece of kit.
Ceramic Tiling Tools, Raimondi Tools UK & Ireland - http://www.ceramic-tiling-tools.com/shop/index.asp?catID=12
Last edited:
Reply to Marble bullnose grinding wheel in the Tiling Tools | Tile Tools - Tile Installing Tools area at TilersForums.com
There are similar tiling threads here
Hi Guys have a big gap above tray to fill 2cm high 1cm deep (3/4in x 1/2in)
Any suggestions...
Hi all! Just wondering what the best advice is for book-keeping? Been self employed now for a...
Good morning all.
After a little advice. I'll post pictures a bit later. However....
The...
Hi!
I'm looking for some advice, I have laid some SLC (Mapei 1210) in our conservatory in...
I had a small leak in the main water line before the stop tap in my 1950s house. The copper pipe...
Advertisement
Share This Page
Tiling Tools
Find the cheapest price for both professional and DIY wall and floor tiling tools in the UK. Brands such as Rubi, Genesis, Fein, Karl Dahm, isomat, Schluter, Tilemaster and more.
New Tiling Questions
-
UK Question about tile sizesI have moved into a new house and want to tile the downstairs bathroom walls. Its not a big room but my wife likes the idea of a feature wall tile and then a grey / white tile on the other 3...
- Started by supersolid2
- Replies: 1
-
Another First for UK Tiling Forum; Crossing the 1 Million Posts Mark Soon | From Tilers Forums .co.ukAnother First for UK Tiling Forum; Crossing the 1 Million Posts Mark Soon It appears the other UK Tiling Forum is using a Free WordPress (that’s fine) but they went for wpForo instead of bridging...
- Started by Dan
- Replies: 0
-
USA Verde Alpi marble tiles 12 x 12I'm searching for 42 pieces of 12" x 12" Verde Alpi marble tiles. Preferably honed. 12" x 24" could work also. I am in San Diego, CA, USA, so would need packaging and shipment if not local. here...
- Started by EAC
- Replies: 0
-
Have you ever worked for a National Tile Supplier or even just smaller big chain tile suppliers?Have you ever worked for a National Tile Supplier or even just smaller big chain tile suppliers? I'll tell you a funny story about how I got a job with Topps Tiles Newcastle and got top sales...
- Started by Dan
- Replies: 2
-
Hey all not the real Bob Marley here Im afraidNice forum you have here. Seems very helpful. I have some work coming up soon so will post in the more relevant forum. I hope your businesses are flourishing! Be well
- Started by Bob Marley
- Replies: 1
Replies you've not seen
-
Job in Colchester, maybe leading to moreHi andy could you give me a call my name is noel and i am a professional bathroom tiler wih over 15 years experience tiling bathrooms,ensuites etc...
- Latest: noel brown
-
UK Question about tile sizesMatching grout lines isn’t an issue with different sized tiles . On the feature wall centralise left to right and top to bottom. Creates a better...
- Latest: Dave
-
Underfloor Running CostsBased on your room it's around 2.6kw per hour assuming its running permanently. Your heat loss needs to be calculated so you can find out how much...
- Latest: Ajax123
-
Another First for UK Tiling Forum; Crossing the 1 Million Posts Mark Soon | From Tilers Forums .co.ukAnother First for UK Tiling Forum; Crossing the 1 Million Posts Mark Soon It appears the other UK Tiling Forum is using a Free WordPress (that’s...
- Latest: Dan
-
New Good Morning Thread 2024Oh what a nice start to the week!!! You doing a rental while it's in garage? What make and year is it matey, need a hand finding a clutch for it...
- Latest: Dan