Internal Corner between 2 different stones

[mcampos]

I have a project where the travertine is intersecting a laid-up stone with a rough surface. What is the best way to seal/construct this joint? Mitered? Silicon-sealed? Metal profile? Thanks!

 

[david campbell]

i would use a metal profile as it would also act as an expansion and look neater

ps -welcome to the forum

 

[peckers]

Or you could use an expansion joint.

 

[DHTiling]

Hi and welcome..

Fill the joint with silicone and leave to set, trim flush with a knife once set..

 

[hillhead]

:welcome:
any pics? can you not profile the trav to fit close then silicon?