How do i fill a big hole? - TilersForums.com

[Antman]

The wash basin has been relocated and has left a large hole in the brick wall.
The whole area to be filled is about half a square metre with the deepest part in the middle about 2 inches deep.

I've only just started as a tiler and not sure if / how to tackle this.
I was thinking of building up with cement render but I'm thinking this hole is too big.

Any ideas

 

[smokey1234x]

i hav used bonding for this job several times and never had any problems

 

[macten]

Cut some plasterboard and stick that in using PB adhesive.
Then build up and make flush with some rapid set - you can tile straight onto that after 3 hours

 

[DHTiling]

As macten sez...just dot & dab some plaster board flush to the existing wall then no need to patch in....