I am currently tiling a shower area.
Field tiles are installed with space for a vertical 300mm vertical feature/ border and a 100mm horizontal border.
Both horizontal and vertical borders will be fitted with glass mosiac tiles of different designs but both of a depth of 7mm.
I have used the dog tooth method to level the border recesses; 7mm tile depth +3mm adhesive.
I have researched on here, the Web and YouTube and are still a little confused with a number of questions:
1. The tiles are glass with a non transparent opaque backing, though the sides are transparent. Grout colour will be grey. Do I need to use a grey coloured adhesive in case some show through the sides of the mosiacs?
2. Should I use a specific adhesive? Shower area is fully tanked. I have been using Ardex X7W for the field tiles. I've read that Ardex X77 is better for glass mosiacs because of the non slip properties. Any suggestions / advice or am I still good with the same adhesive as the field tiles?
3. Is normal grout OK? I've read some grouts can be coarse and scratch the glass.
4. Should I use a 6mm by 6mm notched trowel, which should give a compressed 3mm bed (dog tooth recess is 7mm tile depth plus 3mm adhesive. My plan was to use the 5mm by 5mm trowel that I have but I'm now thinking it will leave the mosiacs slightly recessed.
5. There's conflicting information on whether or not you should flatten the ridges of adhesive before applying the mosiacs. I understand the for clear glass tiles it makes sense to do it because the ridges will show through if not 100 % coverage but is still a good method for opaque backed mosiacs?
I know that's a lot of questions and I appreciate there are various methods and people prefer there own techniques but would appreciate your advice.
Many thanks in advance,
Daz
Field tiles are installed with space for a vertical 300mm vertical feature/ border and a 100mm horizontal border.
Both horizontal and vertical borders will be fitted with glass mosiac tiles of different designs but both of a depth of 7mm.
I have used the dog tooth method to level the border recesses; 7mm tile depth +3mm adhesive.
I have researched on here, the Web and YouTube and are still a little confused with a number of questions:
1. The tiles are glass with a non transparent opaque backing, though the sides are transparent. Grout colour will be grey. Do I need to use a grey coloured adhesive in case some show through the sides of the mosiacs?
2. Should I use a specific adhesive? Shower area is fully tanked. I have been using Ardex X7W for the field tiles. I've read that Ardex X77 is better for glass mosiacs because of the non slip properties. Any suggestions / advice or am I still good with the same adhesive as the field tiles?
3. Is normal grout OK? I've read some grouts can be coarse and scratch the glass.
4. Should I use a 6mm by 6mm notched trowel, which should give a compressed 3mm bed (dog tooth recess is 7mm tile depth plus 3mm adhesive. My plan was to use the 5mm by 5mm trowel that I have but I'm now thinking it will leave the mosiacs slightly recessed.
5. There's conflicting information on whether or not you should flatten the ridges of adhesive before applying the mosiacs. I understand the for clear glass tiles it makes sense to do it because the ridges will show through if not 100 % coverage but is still a good method for opaque backed mosiacs?
I know that's a lot of questions and I appreciate there are various methods and people prefer there own techniques but would appreciate your advice.
Many thanks in advance,
Daz