Search the forum,

Discuss Van roof tube in the General Business Advice area at TilersForums.com.

G

GoneGuy

not sure right place to post this?
I'm looking to make a roof tube but to place it inside my Renault trafic as I don't want the undesirables constantly breaking into a roof mounted tube expecting copper tubes to be in there.
I was thinking of using 40mm waste pipe screwed to the ceiling using brackets.
Reason I don't want to use 110mm is that it would be too big and bang my head, plus I will prob carry max 4-5 tile trims.
Has anyone tried fitting one this way? I know I will prob have to cut a hole
In the bulkhead.
 
G

GoneGuy

My mate has got a traffic and has a bit of drain pipe inside the van for trims. He's had to put it in diagonally from left back door to front right of bulk head. That way he hasn't had to cut bulk head.
Hope this helps
I'm not too bothered about cutting the bulkhead, not sure if would be best to put it on the floor or underside of the roof
 
O

Old Mod

Surely the idea of a bulkhead is to prevent anything coming from behind and taking either the windshield out, or indeed you!
End cap or not, wrong time, wrong day, perfect set of circumstances, and the very least you'll have to contend with is a shattered windscreen.
Their strength is from the front, NOT the back!
Ask anyone who's punched one or two! :D:D
 

Reply to Van roof tube in the General Business Advice area at TilersForums.com

Posting a tiling question to the forum? Post in Tilers' Talk if you are unsure which forum to post in. We'll move it if there's a more suitable forum.

Advertisement

Birthdays

Top