Show Us YOUR Work Thread - Tilers Pictures - TilersForums.com

[Tony73]

15mx5mx1,5m pool. 1200x1200x10 porcelain tiles. Setting out was most important, as all joints inside pool and surround have to line up. Ardex adhesive and Kerrakol anthracite grout.

 

[Bill]

15mx5mx1,5m pool. 1200x1200x10 porcelain tiles. Setting out was most important, as all joints inside pool and surround have to line up. Ardex adhesive and Kerrakol anthracite grout.
View attachment 100799

Lovely workmanship but if only the treads and risers would have lined up with the wall joints too - then a masterpiece.

Excellent stuff.

 

[Tony73]

Lovely workmanship but if only the treads and risers would have lined up with the wall joints too - then a masterpiece.

Excellent stuff.

I knew somebody would ask. but I wanted to see treads in one pease as you walk into the pool.

 

[WetSaw]

I knew somebody would ask. but I wanted to see treads in one pease as you walk into the pool.

I think he meant from the side, it looks like 15mm or so on the depth of the risers of the 5 steps in the middle would have lined up the front of the step to the grout lines on the walls and floor. Not a criticism, I wouldn't even know where to start, just an observation!
These xl format are getting everywhere now, any pictures of it full?

 

[Tony73]

I think he meant from the side, it looks like 15mm or so on the depth of the risers of the 5 steps in the middle would have lined up the front of the step to the grout lines on the walls and floor. Not a criticism, I wouldn't even know where to start, just an observation!
These xl format are getting everywhere now, any pictures of it full?

I didn't want any grout line on treads And still need few more days to finish Jacuzzi (600x600 tiles) . Going back there in 2 weeks. Will post more pics.

 

[Tony73]

Lovely workmanship but if only the treads and risers would have lined up with the wall joints too - then a masterpiece.

Excellent stuff.

Thank you

 

[Waluigi]

Which kerakoll grout is it you’re using @Tony73 ?

I’m trying some out this week.

 

[Tony73]

Which kerakoll grout is it you’re using @Tony73 ?

I’m trying some out this week.

Fugabella eco2. Very easy to work with. Have used it for the first time myself.

 

[Waluigi]

I think that’s the same stuff I’m using. Fugabella Eco 2-12

Slow setting I believe.

 

[Qwerty]

Its probably the smoothest creamiest grout I've ever used. Nice stuff