Currently reading:
It’s New tools tuesdays
Discuss It’s New tools tuesdays in the Tiling Tools area at TilersForums.com.
I
Italy
I’ve got the montolit battile it’s a good big of kit
I
Italy
this is similar to battile pro, the price changes
Where are those from are the more powerful than the small battilethis is similar to battile pro, the price changes
I
Italy
O
Old Mod
this is similar to battile pro, the price changes
Is the power and vibration frequency
similar to Battile Antonio?
I
Italy
I have to check ... but I guarantee that the power of this is enough and advances. I only use it at half power, because it's too much at most.
O
Old Mod
Thank you Antonio, that’s very helpful.
I
Italy
tonight I look if I can understand the differences ..
and if Giuseppe gets angry ?.... better
I
Italy
There are,
montolit: battery 16V 2ah
rpm 5000/12000
other: 16.8V 1.3ah battery
rpm gives me the maximum value 12000
differences in favor of montolit: 2ah battery and colored rubber
and montolit warranty.
differences in favor of the other: price +/- buy 3/4 pieces with the price
of montolit.
looking at the photos the battery is the same.
also the start-up of the three powers.
The only flaw found, is when you turn it on
the power button seems to sleep a little, not every time.
then I always leave it on, the first few days the battery seemed
consume a lot of energy, then it stabilized and I posed
4 slabs of 120x240 with one refill, I used the maximum power for 5 minutes, the rest was enough for the second speed.
the main problem is that now I also use it with the 120x60 ...
ps. for the cost you can easily try the purchase
Attachments
I
Italy
@LEE MAC @3_fallThere are,
montolit: battery 16V 2ah
rpm 5000/12000
other: 16.8V 1.3ah battery
rpm gives me the maximum value 12000
differences in favor of montolit: 2ah battery and colored rubber
and montolit warranty.
differences in favor of the other: price +/- buy 3/4 pieces with the price
of montolit.
looking at the photos the battery is the same.
also the start-up of the three powers.
The only flaw found, is when you turn it on
the power button seems to sleep a little, not every time.
then I always leave it on, the first few days the battery seemed
consume a lot of energy, then it stabilized and I posed
4 slabs of 120x240 with one refill, I used the maximum power for 5 minutes, the rest was enough for the second speed.
the main problem is that now I also use it with the 120x60 ...
ps. for the cost you can easily try the purchase
WHAT DID I WIN?
O
Old Mod
My gratitude 😊👍
I
Italy
that's enough for me
[automerge]1578415205[/automerge]
I want to try this product ....
does not attract dust blah blah blah and blah
where I bought it there was a photo of a tiler spraying it on a tile cutter RUBI
Attachments
Last edited by a moderator:
O
Old Mod
that's enough for me
[automerge]1578415205[/automerge]
I want to try this product ....
does not attract dust blah blah blah and blah
where I bought it there was a photo of a tiler spraying it on a tile cutter RUBI
I never lubricate my Sigma’s, no need. 😊
I
Italy
I actually bought it for the garage door. and for my new battipav
O
Old Mod
I actually bought it for the garage door. and for my new battipav
🤣 fair enough. 👍
L
LM
I can say my gratitude also 😊👍🏻
[automerge]1578417803[/automerge]
I have been using that oil from 2016 to lubricate the wheel and handle hinges only on my Sigmas @antonio
I
Italy
I only use battipav profi160 tile cutters, the new profi evo model seems to have solved the problems with the metric bar. I'm waiting for a quote and then purchase, but I believe we have not yet started production.
I'm going to buy the profi evo 60 and then see if I can sell all the sigma
Thank you for a fast response @antonio, I would like to try their products in the future, good to know opinions.
Today was my first day working with a new Rubi TX 710 MAX. I like it a lot so far, it is a really powerful tool. However it is approximately 1/3 expensiver compared to MasterPiuma P3 75cm. I also like that fact that it comes inside the case, so it is protected during transport.
Today was my first day working with a new Rubi TX 710 MAX. I like it a lot so far, it is a really powerful tool. However it is approximately 1/3 expensiver compared to MasterPiuma P3 75cm. I also like that fact that it comes inside the case, so it is protected during transport.
L
LM
Let us know how you get on with it and if it’s worth it.New tool Wednesday my proxxon turned up
Will do mate I’ll post some updates on it in a week or so after I’ve put it to good use
L
LM
Nice one Josh thanks. I do a lot of crappy commercial work that involves trims and I’ve often toyed with the idea of getting one but simply never got round to it, still using a grinder lol.
Reply to It’s New tools tuesdays in the Tiling Tools area at TilersForums.com
There are similar tiling threads here
Hi, I'm new to the forum and fairly new to tiling, my only previous "proper" job was my recent bathroom (600x600 porcelain, about 25m walls and floors) which went pretty well.
I'm now having a go...
- cdbe11
- DIY Tiling Forum
- 3
- 2K
Hi all,
I've laid some Arditex NA over the kitchen floor area (not under cabinets. The area is 4.5m x 1.8m.
The top third of the room is totally level. The remainder of the room has a slope...
- redchair
- DIY Tiling Forum
- 3
- 1K
Posting a tiling question to the forum? Post in Tilers' Talk if you are unsure which forum to post in. We'll move it if there's a more suitable forum.