Make life easy, search the forum.

Discuss Who knew tape measures could be so complex! in the Tiling Tools - Tile Tools area at TilersForums. USA and UK Tiling Forum

Q

Qwerty

Please checkout the following advertisement.
It seems that every day is a school day. Marc ( @3_fall ) and a few of us were discussing tape measures today (yes we really do find these things interesting! :D).
It seems that your trusty old tape measure may not be as trusty as you thought!!!


It’s something most tilers take for granted, but when you’re in the market for a new tape measure, did you know some are more accurate than others?

All professional tape measures must meet industry standards which set guidelines for accuracy and margin of error. How closely a tape meets the guidelines dictates how it will be classified. The EU Weights and Measures act categorises tape measures into three separate classes: I, II and III.

As an example let’s compare a class I with a class II tape. EU guidelines state a class I tape up to 2m in length must be accurate to within a margin of 0.3mm. Under the same guidelines a class II tape of the same length should be accurate to within 0.7mm.

What level of error can be expected?

EC tape measure accuracy tests are carried out at 20°C based on a pulling force of 50 Newtons for steel tapes and 20 Newtons for fibreglass equivalents. The following table should help you see the difference between Class 1 and Class 2 tapes.

-Blade Length(m)
Class I (mm)
Class II (mm)

2
± 0.3
± 0.7

3
± 0.4
± 0.9

5
± 0.6
± 1.3

8
± 0.9
± 1.9

10
± 1.1
± 2.3

15
± 1.6
± 3.3

20
± 2.1
± 4.3

25
± 2.6
± 5.3

30
± 3.1
± 6.3

50
± 5.1
± 10.3

100
± 10.1
± 20.3

0.3mm doesn’t sound like much but for some professions it’s the difference between success and failure – there are some jobs where there really is little margin for error and tile certainly can be one of these professions where only the most precise measurements will do. This is when we could almost certainly do with a class 1 tape measure.

While most tape manufacturers specialise in producing multi-purpose class II (known as EC Class 2) tapes for a broad market there are a few who pride themselves on manufacturing class I, professional grade tape measures. Fisco and Advent class I tape measures are two of only a few manufacturers to produce high quality, accurate and value for money class 1 tapes. All Fisco and Advent class I tapes meet EU Weights and Measures standards.




Well there you have it.... next time you have a measure in your hand, just take a looksie to check if it is a class I, II or III (it's written on the tape steel and/ or on the casing). If it's a class III then you may want to invest in a new one!!!
 
OP
G

GoneGuy

Stanley tape measure

image.jpg
 
OP
O

Old Mod

As long as you use the same tape to measure, mark and cut then not a problem, only becomes a problem when say you measure then tell someone else to mark and cut with a different tape.

I agree with that statement Ian, however, what about when it comes to setting out?
If you’re setting out over a large area, the discrepancy in your tape could throw you out.
I know it has me.
I’m far more inclined these days to lay out an area dry to get a start line, whereas for most of my time I’ve measured it out.
Sometimes it would miss, and that is probably the reason why.
Measure a 600 and it’ll nearly always measure 600 with any tape, cos we’re talking 0.3-0.7 in 2 metres.
Measure out 20 linear metres, strike a line and go!
What do you think your chances are of hitting your start mark are?
 
OP
B

Blunt Tool

I agree with that statement Ian, however, what about when it comes to setting out?
If you’re setting out over a large area, the discrepancy in your tape could throw you out.
I know it has me.
I’m far more inclined these days to lay out an area dry to get a start line, whereas for most of my time I’ve measured it out.
Sometimes it would miss, and that is probably the reason why.
Measure a 600 and it’ll nearly always measure 600 with any tape, cos we’re talking 0.3-0.7 in 2 metres.
Measure out 20 linear metres, strike a line and go!
What do you think your chances are of hitting your start mark are?
Ok so same tape measure looking for centre line of a 40 metre length room you measure in 20 metres one side then 20 metres other side with same tape even if it’s not dead on 20 metres you will just half the discrepancy to split the difference so as long as you use same tape all the time would be ok.
 

Reply to Who knew tape measures could be so complex! in the Tiling Tools - Tile Tools area at TilersForums.com

Or checkout our tile training advice or the Tile Standards

This website is hosted and managed by www.untoldmedia.co.uk. Creating content since 2001.

Tiling Tools

Find the cheapest price for both professional and DIY wall and floor tiling tools in the UK. Brands such as Rubi, Genesis, Fein, Karl Dahm, isomat, Schluter, Tilemaster and more.

New Tiling Questions

UK Tiling Forum Stats

Threads
66,600
Messages
866,701
Members
9,511
Latest member
mmcdon47
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock