which diamond blade? - Tile Advice

[Andy Allen]

i want to up grade the blade on a rubi ND200 wet cutter.

i was looking at the marcrist ck 850, any one used one of these, are they any good, any other suggestions.............cheers

 

[DHTiling]

Marcrist are good blades..

Montolit do cracking blades as well..

 

[grumpygrouter]

They cut really well but mine drifts on the cut on my Rubi rail cutter!

 

[DHTiling]

They cut really well but mine drifts on the cut on my Rubi rail cutter!

That will be your plastic bearing runners on the cutter..

 

[poynton phil]

I use the rubi cpc2, and thats a cracking blade. I used to use the marcrist, but as grumpy say's they do tend to wander, on the rubi bridge saw's.

 

[kilty55]

i used marcrist blades on my cutters and i rate them,have heard the montolit ones are great too

 

[aph257]

i use the Rubi CP2 similar price to the Marcrist.

 

[Aston]

i used to use marcrist, but i'm with the govenor above...montolits blades for me now! they do a nice range...

 

[DHTiling]

i used to use marcrist, but i'm with the govenor above...montolits blades for me now! they do a nice range...

Ed.. wait till you see the new blade i have been testing for Trade tiler.. :drool5:

It is awesome and eats stone and porcelain from 1 blade.. ( grinder blade)

p.s.. it is a montolit blade.

 

[Aston]

show me it, show me it now!!! lol
dave, will it fit in the old dewalt hand saw?

 

[DHTiling]

That i don't know.. it is grinder bore.. and 100mm.. but it cuts super super fast it is unbelievable..

 

[DHTiling]

Oh! and Trade tiler has my feedback and is ordering a load in... so keep an eye out for them ..

 

[ukProTile]

I just got the nd300 and got rubi's porcelain blade! It eats through high grade porcs like its soft ceramic! so quick! 2 hp motor.....BEAST

 

[White Room]

I have the nd200 with marcrist blade

 

[Andy Allen]

I have the nd200 with marcrist blade

is it as good as they say it is .......ie. eats porcelain for breakfast.