Thin porcelain suppliers - Tile Advice

[Qwerty]

^^ Had to remove prices as its in the open forum ^^

 

[Waluigi]

Sorry I didn’t realise. I’ve edited the post now to make more sense and to abide by the rules.

The pricing thing makes sense

 

[Dumbo]

Try artisans of devizes as they are capietra

 

[Waluigi]

Thanks, I tried them- they were a bit more expensive than my local shop.

 

[Dumbo]

Try salisbury tile store . He does deals all the time .

 

[Dumbo]

Thanks, I tried them- they were a bit more expensive than my local shop.

Message me i will you a name at artisans to speak to .

 

[Waluigi]

What are people using to cut these tiles? They are 1200mm so not too bad.

Edit: also as an afterthought as the tiles are 4.8mm thick, which levelling system is recommended?

 

[Old Mod]

Have you fitted thin tile before?
A 1200 slide cutter works best or an angle grinder, that’s without buying a large format cutter, or you could hire my Kera Cut.

 

[Waluigi]

No I’ve not done thin tiles before and I think that 1200mm will be my limit. I’ve already quoted another Shower room with the Smaller porcel thin tiles so it’s more than a one off. I think a slider would suit me best. I quite like the look of the Montolit system.

 

[Old Mod]

No I’ve not done thin tiles before, I quite like the look of the Montolit system.

When you say Montolit system, do you mean the flashline?

If you’ve not fitted them before, you’d do well to contact Ray Smith at Porcelthin and ask if you can have an aquaint course.
He’ll spend as long with you as you need, it’s 100% hands on, and won't charge you a penny. They’re in south Bermondsey.

 

[Waluigi]

I’d love to but don’t have time unfortunately. I’m starting the job on Monday.

I must pop over some time in the future though.

Edit: yes Flashline

 

[Old Mod]

For occasional use, the flashline works just fine.
Don’t underestimate how good your prep needs to be.

 

[Waluigi]

I plan to get my plasterboard within 1mm over 2.4M.

The whole room is having a combination of dot and dab and stud work. I’m getting this lot perfect.

 

[Italy]

Have you fitted thin tile before?
A 1200 slide cutter works best or an angle grinder, that’s without buying a large format cutter, or you could hire my Kera Cut.

same

 

[Simon Dale]

Message me i will you a name at artisans to speak to .

Hamish lol