test without haste :) I'm slow and old :( - Tile Advice

[Simon Dale]

Grazie

 

[Italy]

sankyo no longer cuts hard tiles. I leave with Italian..

 

[Italy]

.....

 

[Italy]

the Italian surrendered ....
I cut a 20 tiles 60x60x2 and it was ok.
Today has surrendered be in front of a 10mm.

I took this bath, 60x120 florim rex.
never seen a tile so hard ....
with the tile cutter it was almost impossible to cut them, 1 cut every 4
it was ok. the tiles were counted, I could not afford to make mistakes.
so I decided to use the grinder, 6 diamond blades available.
the only blade that could cut a bit, was an old montolit tcs
now at the end of life and even cracked.
I also tried it with a sponge, nothing to do.
I gave up and bought a new tcs 115 .... amen
Ps the tcs montolit is smoking the tiles ...
first, they smoked the blades

 

[LM]

Thanks for sharing your experience @antonio.
That knowledge will save a lot of time and money for some of us.
I see you’re using new clips?

 

[LM]

@antonio is there any difference between this blade and yours?

 

[Italy]

View attachment 98896 @antonio is there any difference between this blade and yours?

green line is basic
blu line is Universal line
red line professional.
gold line high technology
the green line I've never tried it

 

[Italy]

Thanks for sharing your experience @antonio.
That knowledge will save a lot of time and money for some of us.
I see you’re using new clips?

I will speak at the end of the tests. I have to try it on 30x60 or 60x60

 

[Italy]

then, the pink blade made in Italy
he made me turns the bales and ended up in the toolbox.
I mounted this black norton, I state that it was the first time
that I used that diamond design
and I did not convince me already before use ..
but .... after 2 days .... I changed my mind,
the blade sinks into the porcelain like
butter and with a few chips, I cross my fingers and I hope it lasts a lot of time.
we feel next week with thin porcelain cuts.
I do not go on vacation ...