Posting a message to the forum will remove the above advertisement

Discuss Suggestions on a good blade for cutting 20mm stone. in the Stone Tiling Forum area at TilersForums.co.uk.

  1. Stu wells

    Stu wells Active Member

    Location:
    Surrey
    Looking for some recommendations on a good blade for my grinder. Used for a stone job I have coming up 20mm thick (Jaipur brushed) is the name of the stone
     
    • Like Like x 1
  2. callatiler

    callatiler Professional Tiler JOTM Winner Top Contributor

    Location:
    Aberdeen
    Lots of good ones out there, just make sure it's a turbo blade to get rid of material quickly. I do like Rubi turbo viper from @Pro Tiler Tools@Pro Tiler Tools
     
    • Like Like x 2
  3. Andystiletiling

    Andystiletiling Professional Tiler

    Location:
    Burnley
    Used the ATS flush cut vanity blade last week and found it excellent... C__Data_Users_DefApps_AppData_INTERNETEXPLORER_Temp_Saved Images_M14_20Blade_600_0.jpg
     
    • Like Like x 2
  4. kevsalt

    kevsalt Professional Tiler

    Location:
    whiston staffs
    marcrist ck 850 gets my vote
     
    • Like Like x 1
  5. jcrtiling

    jcrtiling Professional Tiler TTA Member Top Contributor

    Location:
    Salisbury
    How is that on porcelain
     
  6. Andystiletiling

    Andystiletiling Professional Tiler

    Location:
    Burnley
    Wouldn't recommend it for porc mate
     
    • Like Like x 1
  7. Localtiler

    Localtiler Professional Tiler Top Contributor

    Location:
    Yorkshire
    Looks like a good blade. I use the vacuum brased blade on most stone, last time I used 20mm I used 9 inch grinder
     
    • Like Like x 2
  8. jcrtiling

    jcrtiling Professional Tiler TTA Member Top Contributor

    Location:
    Salisbury
    Often thought about getting larger grinder
     
  9. Localtiler

    Localtiler Professional Tiler Top Contributor

    Location:
    Yorkshire
    Loads easier on thick stone, flys through it
     
  10. Pro Tiler Tools

    Pro Tiler Tools TF Official Sponsor

    Location:
    Northampton
    I have Jaipur on my floor at home and Marcrist CK850 is what worked best for me.

    Plus it comes with a 30 day money back guarantee!

    Marcrist CK850 (Best Seller) Premium Range | Pro Tiler Tools - https://www.protilertools.co.uk/tiler-tool/8569/marcrist-ck850-best-seller-premium-range

    I did also use this blade on a similar limestone and it gave a perfect cut:

    Sigma Settori Ravvicinati 250mm x 30.0 Diamond Blade 79C | Buy Sigma Diamond Blades Online from Pro Tiler Tools - https://www.protilertools.co.uk/sigma-diamond-blades/48734/sigma-settori-ravvicinati-250mm-x-300-diamond-blade-79c

    If i can help with anything please let me know, either on here or fell free to call me on 01604 859800.

    Sam
     
  11. Pro Tiler Tools

    Pro Tiler Tools TF Official Sponsor

    Location:
    Northampton
  12. Ttt1601

    Ttt1601 Professional Tiler JOTM Winner

    No need to go bigger, have a look at the new dewalt grinder, I've had one about a month now, it's 1100watts will fly through anything with a decent blade on
     
    • Like Like x 1
  13. jcrtiling

    jcrtiling Professional Tiler TTA Member Top Contributor

    Location:
    Salisbury
    I was thinking blade depth more than power as my grinder has an effective depth of 30mm . I know that is enough but thought it might be easier with a larger diameter blade .
     
  14. Ttt1601

    Ttt1601 Professional Tiler JOTM Winner

    Fair enough @jcrtiling@jcrtiling I usually just have the blade only slightly out of thw bottom of the cut as I cut flat on a bench now so didn't really think of the depth issue, plus I'm just not a fan of the 9 inch and will only use if absolutely necessary
     
  15. jcrtiling

    jcrtiling Professional Tiler TTA Member Top Contributor

    Location:
    Salisbury
    Do you know I hate to be pedantic but I was actually thinking 7". I agree on 9" it is a bitof a beast .
     
  16. Localtiler

    Localtiler Professional Tiler Top Contributor

    Location:
    Yorkshire
    9 inch is a beast but it's got the balls to cut thick stone with ease. Probably twice as fast as using a 115m grinder
     
    • Agree Agree x 1
  17. Stu wells

    Stu wells Active Member

    Location:
    Surrey
    Took your advice and after the first few cuts it seemed to wear its self in, worked a dream ✔️ Cheers

    IMG_0495.JPG
     
    • Like Like x 4
  18. 3_fall

    3_fall Administrator. Staff Member Trusted Advisor Professional Tiler JOTM Winner Top Contributor

    Location:
    SW London
    You gave yourself best answer :)
    Not so sure you meant to do that. :p
     
  19. Stu wells

    Stu wells Active Member

    Location:
    Surrey
    Hahahaha only just seen this I will 'unbest' myself. I'm a newbie let me off this once.
     
    • Funny Funny x 1
Loading...
Similar Threads - Suggestions blade cutting Forum Date
Suggestions appreciated for best results discontinued stone Tiling Forum Sep 1, 2017
Dressing grinder blades Tiling Forum Monday at 9:42 AM
  • Find a Tiler Post a Job Ask a Question Tile Events Tile Pics Blog Adhesive Poll Handy Downloads