Posting a message to the forum will remove the above advertisement
  1. Checkout our Tilers Insurance area for awesome prices on Van Insurance and Public Liability Insurance for Wall and Floor Tilers

  2. ismoat Building Products

Discuss Rounded corner of bath, trim problem! in the Tiling Forum area at TilersForums.co.uk.

  1. MarkSS

    MarkSS Active Member

    Location:
    Maidenhead
    Any ideas? This is what my tiler has done. It’s a carron integra bath.
    Nothing else to do but recess the frame more and put up with an overhang?

    9B6A9565-A993-463E-B72B-E430A4D2CC3B.jpeg
     
  2. Best Answer:
    Post #2 by macten, Jun 11, 2018
  3. macten

    macten Professional Tiler

    Location:
    Nottingham
    Best Answer
    IMG_0997.JPG

    I know this is only one side in the pic but I always bring it out and have a little ledge if the bath is going round two sides and/or curved too much to get flush.

    IMG_1040.JPG
     
    • Like Like x 5
  4. Albert

    Albert Professional Tiler

    Location:
    Gateshead NE8, UK
    This might do the job [​IMG]
     
    • Like Like x 4
    • Winner Winner x 2
  5. MarkSS

    MarkSS Active Member

    Location:
    Maidenhead
    Thanks. Not to keen on the ledge but I can see what you mean.
    We’re going to try this on a cut back tile.

    B392704D-63D2-48E4-97D7-A41C1FE36764.png
     
  6. Albert

    Albert Professional Tiler

    Location:
    Gateshead NE8, UK
    [​IMG]Here is another way
     
    • Like Like x 1
  7. MarkSS

    MarkSS Active Member

    Location:
    Maidenhead
    Won’t that still leave the top edge of the tile exposed?
    Ideally a corner trim of about 30mm radius would do it. Bloody hell however much you plan something always goes Pete Tong
     
  8. antonio

    antonio Trusted Advisor Professional Tiler JOTM Winner Top Contributor

    Location:
    italy
    ........ old style

    IMG_20170724_093254.jpg
     
    • Like Like x 3
    • Winner Winner x 2
    • Agree Agree x 1
  9. MarkSS

    MarkSS Active Member

    Location:
    Maidenhead
    Trim on top edge as well? I guess ...
     
  10. MarkSS

    MarkSS Active Member

    Location:
    Maidenhead
    I think we’re going to go for the ledge
    looking like the best solution, had originally decided against a deck for space but a think ledge is looking good. Thanks.
    Like below, build a skirting frame.

    1FC53847-6466-4139-BA89-B47C79C3595B.jpeg
     
  11. pdc

    pdc Living the dream..... Professional Tiler

    No trim, a mitred strip on the corner.
     
  12. antonio

    antonio Trusted Advisor Professional Tiler JOTM Winner Top Contributor

    Location:
    italy
    thanks pdc ;)
     
    • Like Like x 1
Loading...
Similar Threads - Rounded corner bath Forum Date
outside corner in rectangle bathroom DIY Tiling Forum Tuesday at 5:55 PM
Internal corner trim or silicone? DIY Tiling Forum Jun 14, 2018
Find a Tiler Post a Job Ask a Question Tile Events Tile Pics Blog Adhesive Poll Handy Downloads