Looking for advice on the best Laser Level? - Tile Advice

[Qwerty]

Wow! That is quite a difference

 

[faceman]

Is a green laser much harder to produce than a red one hence the price difference?

I am not great at physics so could one of you boffins explain, please?[/QUO

Is a green laser much harder to produce than a red one hence the price difference?

I am not great at physics so could one of you boffins explain, please?

The green one is a better stregth

 

[Old Mod]

Is a green laser much harder to produce than a red one hence the price difference?

I am not great at physics so could one of you boffins explain, please?

Basically, there’s a lot more electronics involved in prducing a green laser, plus they require a lot more power.
Red lasers are very basic in their electronics.

 

[J Sid]

View attachment 105364 View attachment 105365

so @Simon Dale is getting a refund

 

[Old Mod]

so @Simon Dale is getting a refund

From TilersTools? I very much doubt it mate.

 

[J Sid]

miss sold

my red one is better then that , maybe

 

[Old Mod]

miss sold

The only Miss Sold they’ll know probably works behind the jump mate.

 

[Bopster]

Well I was considering the imex, no more.
Anyone able to compare against Bosch?
I’m not trying to avoid the dewalt as most my tools are yellow, I just like to assess alternatives

 

[Old Mod]

Well I was considering the imex, no more.
Anyone able to compare against Bosch?
I’m not trying to avoid the dewalt as most my tools are yellow, I just like to assess alternatives

Antonio has tested the Bosch I believe, but then he’s only an apprentice.

 

[Bill]

Basically, there’s a lot more electronics involved in prducing a green laser, plus they require a lot more power.
Red lasers are very basic in their electronics.

View attachment 105366

So it looks like I should really ask for a blue or yellow laser .....

Know Your Laser Spectrum: Red vs Green vs Blue vs Yellow - Tested.com - https://www.tested.com/tech/830-know-your-laser-spectrum-red-vs-green-vs-blue-vs-yellow/

 

[Time's Ran Out]

This Dewalt green is doing a great job in this basement pool - 17 linear meters long.

 

[Italy]

Antonio has tested the Bosch I believe, but then he’s only an apprentice.

have i tested? I only bought the best. but you can't say here ... you only see yellow, so my tests are useless.
there is no need to test the bosch, after 10 LASERS purchased and another 4/5 tried I know what is better to 360 degrees. but I'm just an apprentice.
and tired of discussing LASER and what the receiver is for.

 

[Old Mod]

have i tested? I only bought the best. but you can't say here ... you only see yellow, so my tests are useless.
there is no need to test the bosch, after 10 LASERS purchased and another 4/5 tried I know what is better to 360 degrees. but I'm just an apprentice.
and tired of discussing LASER and what the receiver is for.

And a very grumpy apprentice too.

 

[Italy]

And a very grumpy apprentice too.

I'm holding myself back...

 

[widler]

Never had a problem on floors Craig. Have you tried lifting it off the floor few inches so that it can get over any lumps and dips on floor?

Sorry Marc, i didn’t know what make mine was, I’m not using the same as you, remember I’m a northerner on £2.58m2
I use the £200 ish one
I’ve lifted it off the floor as well, no better