Help with No More Ply on floorboards - Tile Advice

[emma101]

Hi,
I have been reading through all the info around No More Ply and your posts on the topic but am still unsure how to level the surface beforehand. Any help much appreciated.
I have old floorboards they are tightly packed however there is some variance in the levels of the boards, and also there is gradual sloping in some areas. Overall the floor is solid and i've secured down lose boards.
I'm not sure if the best thing would be to use a flexible tile adhesive as a filler to level out the unevenness and lay the NMP over the top, or if something else would be needed. How level does the floor need to be?
I am laying in 2 rooms 12 & 14 sq m and a hallway.
thank you

 

[hmtiling]

Use loads of the nmp glue and screws then a decent flexible levelling compound on top

 

[Dumbo]

As above I would fix down then level on top

 

[emma101]

thanks @hmtiling and @jcrtiling for your replies much appreciated. I can see that working. One more question, would you apply the NMP primer before or after the levelling compound? thanks

 

[Cranbrook]

Hi,
I have been reading through all the info around No More Ply and your posts on the topic but am still unsure how to level the surface beforehand. Any help much appreciated.
I have old floorboards they are tightly packed however there is some variance in the levels of the boards, and also there is gradual sloping in some areas. Overall the floor is solid and i've secured down lose boards.
I'm not sure if the best thing would be to use a flexible tile adhesive as a filler to level out the unevenness and lay the NMP over the top, or if something else would be needed. How level does the floor need to be?
I am laying in 2 rooms 12 & 14 sq m and a hallway.
thank you

The floor should have less than 3mm deviation over 2 metres..

 

[hmtiling]

thanks @hmtiling and @jcrtiling for your replies much appreciated. I can see that working. One more question, would you apply the NMP primer before or after the levelling compound? thanks

Before and after.