bostik primer coming off when scrapping feet on - Tile Advice

[average]

Tile on tile, that what you mean?
You primed tiles to be tiled with more tiles?

primed the tiles for some self leveler on top because some needed leveling because of low spots. Tiles can go onto tiles if primed

 

[One Day]

skinned on the glaze.
Should've used eco primgrip or similar.

 

[average]

skinned on the glaze.
Should've used eco primgrip or similar.

Used what tile store recommended. If its glazed as you say, should i take it all off and redo with different primer.

 

[One Day]

Actually, reading the info it sounds like it should be suitable.
I've never used it though.

 

[Old Mod]

Used what tile store recommended. If its glazed as you say, should i take it all off and redo with different primer.

The best I’ve used for this type of application is called Super Grund from Isomat.
It’s a resin based grit primer.
It’s like painting on neat sandpaper.

 

[One Day]

then again, I wouldn't use Bostik anything.

 

[average]

skinned on the glaze.
Should've used eco primgrip or similar.

Should it be well bonded as when i turn my boot on it with force, nothing should come off

 

[Old Mod]

Actually, reading the info it sounds like it should be suitable.
I've never used it though.

You mean you found info?
I tried their website and found everything but haha

 

[One Day]

You mean you found info?
I tried their website and found everything but haha

Tech Tiles - http://www.techtiles.ie/product/Special_Hard_Surface_Primer_1kg/47
all i could find.

 

[GoneGuy]

I would have used Mapei eco prim grip.
Could you post a pic of the tub to give us an idea

 

[average]

 

[Dumbo]

You mean you found info?
I tried their website and found everything but haha

Got to admit I tried their website couldn't find anything of any use

 

[average]

I can walk on it, rub my finger on it and nothing comes off but if i scrap my finger or twist my feet hard on it, this is when it comes off. Would this be the same as the skinning as yous think it is or will mines be ok in the morning. If not, should i remove it then redo.

 

[GoneGuy]

I would check it in the morning if it’s still the same I would remove and use a better brand

 

[One Day]

Did you clean the existing tiles and de-grease them?