You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
mitre
The mitre (Commonwealth English) (; Greek: μίτρα, "headband" or "turban") or miter (American English; see spelling differences), is a type of headgear now known as the traditional, ceremonial headdress of bishops and certain abbots in traditional Christianity. Mitres are worn in the Catholic Church, Eastern Orthodox Church, Oriental Orthodox Churches, the Anglican Communion, some Lutheran churches, for important ceremonies, by the Metropolitan of the Malankara Mar Thoma Syrian Church, and also, in the Catholic Church, all cardinals, whether or not bishops, and some Eastern Orthodox archpriests.
Hi
I have some KitKat tiles that will be installed on an external corner. Is it feasible to cut / mitre join them? Then silicone the gap.
The mitre cut would be on the longest length (I.e cutting 2 tiles)...
Hi, I am at a complete standstill, just cant get my head around the corner joint I need to do in the window reveal. So I am just tiling 3 tiles up the reveal and have followed tutorials on "how to do a 3 way mitre" but it just doesnt work for me. Is it that the trim I am using is just rounded...
has anyone got the rubi du 200-evo 650 for cutting mitres on tiles.
or have any recommendations for a cutter to do this.
done the last 4 or 5 with the angle grinder looking for a cleaner cut really
What's your tiling question? Pictures can be added.
Hi anyone recommend if its worth buying sigma jolly for mitre work.
Got a reception area to do in large format so would take the plunge and buy if it speeds up.and leaves a goid finish. You still need to polish for a finish?
Thanks Charlie
Hi there, I hope someone can help me. I’ve just tiled my kitchen, and need to trim the tiles with some chrome upvc angle bar (I tiled over the original tiles so couldn’t use ordinary tile trim). The two way mitres at the corners have worked out fine, but I’m not happy with the three way mitres...
Hi all,
I've brought an Evolution R210CMS mitre saw for cutting tile trims. It comes with a T20 tct multipurpose blade.
The issue I'm having is when I cut steel trim, it keeps kicking back and bending the trim.
My question is, do I need to buy the T68 blade for cutting finer metals? Or is it...
Hello all, just wondered if anyone could tell me the best way to join porcelain mitres together (assuming I can get the cuts right, I'm a DIYer)?
I've seen people say to use resin, if that's right what is the best stuff? I'd be after something white and satin if that exists.
Also, do you put...
Hi, I’m looking for advice/opinion on the use of porcelain tiles cut to a 45 degree mitre for the edge of some steps.
Having spoke to a relative who has had some experience in this area he suggested that given the heavy footfall traffic on stairs that porcelain tiles may chip on the edges.
Has...
Looking to do a few mitred external corners this week (600x300x9 porcelain). Practiced the cuts a few times and very happy with that. Never filled the corners though.
Seen some resin recommendations but most of them are looking difficult to source. The only viable option I can see is Akemi...
Hi All, my first post, so be gentle :)
I’ve been off the tools for a number of years, but the time has come to get them back together and redo my bathroom. I’ve lost touch with the tilers I used when I used to fit kitchens but to be honest I never thought they were as good as what they charged...
As above. As a DIY’er what would be the best way to cut the square edge type polished metal tile trims?
I have normal tin snips, hacksaws and even one of those Evolution compound angle chop saws that cuts through steel and alsorts-but will the blade bash the trim to bits?
Would I be better...
I'm currently on a DIY project.redoijg my bathroom. So far I've built a bath surround and tiled the floor. I wa sloping for some advise on a couple. Of things... NB I'm using bevelled metro tiles.
1. Should I start the vertical tiling at the top of the bath surround? 2. On the top of the...
Hello
I am looking at the possibility of mitring a L cut on metro tiles around a window reveal rather than using trim.
Is this achievable? Any pics?
Many thanks
Hi all
I am looking to purchase a new wet cutter and after reading the forum it seems the RUBI nd200 or the Norton TT200 are rated quite well and would be contenders.
However, I have 600 x 300 Porcelain to cut with mitred edge along the 600 side, from images and videos of the above machines it...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.