You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
bal
Bäl is a populated area, a socken (not to be confused with parish), on the Swedish island of Gotland. It comprises the same area as the administrative Bäl District, established on 1 January 2016.
Whats the difference between these two Bal adhesives please, aside from price and the xp only being available from Topps.
Job is 800x800 x 8 porcelain floor tiles, 50sqm onto an anti crack mat over slc on a concrete subfloor with low profile wet ufh.
Tia
Hi, can I use BAL Quickset Render to level and area between Hardiebacker and drywall then cover with Porcelain Tiles?
BAL tech sheet says ceramic and stone, no mention of Porcelain and can't find much on BAL Quickset Render being used on HardieBacker, any advice welcomed.
Thanks
Guys,
I'm unsure what grout to choose for our latest project and I'm hoping you can help.
We're having 20mm 400x600 porcelain tiles (which look more like sandstone- riven surface and edges etc) installed into a summerhouse (36sqm). It'll be used as a shed, gym, play room etc - so it'll see some...
On the final stretch of this lengthy project and would love to hear your views on Flexible cementious or Epoxy grout for wetroom floor with ply substrate, backer board, electric underfloor heat, under screed. Porcelain mosaic 55mm hexagons, 23mm square, 3mm joints, 6mm deep! Would love to know...
I received an email about BAL External tile adhesive and grout this morning and thought I'd post it to our tiling news area of the forum because there isn't much actual tiling news in here. But if you're looking for workwear you're on a winner. :D :D (no offence to our awesome sponsor...
Hi all
I apreciate its not a tiling topic so thought i would stick it here.
I have nearly a full bottle of bal apd primer left over from doing my bathroom.
I have got to bond a sheet of plasterboard to a brick wall using plasterboard adhesive. I have cleaned the brickwork as best as i can...
We have our bathroom renovated and contracted an experienced tiler to do the tiling job. We removed 2 of the tiles after more than 48 hours as they had misaligned corners. We noticed there seem to be limited area were the tile BAL ready mixed adhesive has actually bonded to the green...
Good Morning,
with the bal waterproofing kit, you do the following:
prime with apd
apply waterproof coating
apply polyester tape
apply waterproof coating
my question is, if the tape is just held on by the waterproof coating which feels like a silicone, then why don’t the weight of the tiles...
My first big tiling job. It's a wet room and I'm at the stage where I have Marmox boards on floor and walls and an Impey former. I'm just about to put down the Impey Waterguard membrane and the instructions specify priming with the supplied Bal APD primer.
I tested the BAL primer inadvertently...
Hi all....hope everyone keeping safe. I have a floor to tile in the next few weeks once the commissioning has completed its cycle.
Customer has purchased BAL flexbone which I have never used although I use other decoupling mats that are bonded to the floor.
What size and style of trowel do you...
Hi All,
Has anyone had experience with Bal Microflex (in white) drying patchy?
My tiler has suggested Bal Grout, after a patchy experience with micromax/2 (i think). Hes been very helpful and is experienced however we like the idea something with anti mould properties. Have have read up about...
I've had my bathroom and wet rooms done using Bal Regal grout. (Ash grey) Its patchy and inconsistant in colour. It's supposed to be resistant to efflorescence, but that's how it looks.
Has anyone encountered issues with this grout?
The fitter insists that it was mixed correctly and Bal have...
I have 2 brand new 30m rolls of BAL rapid tile mat.
I contacted a few places and they sell for £250 each trade.
I'm looking for £100 each .
Based in ls27 leeds
I've got a ground floor of 160 MTRS to price and it's just been screeded and it has UFH I suggested ditra but the owner wants BAL flexbone , I've never used it and I'm a bit nervous as it's such a big area the tiles are big standard 600x600x10 porcelain.
Hi everyone, I'm struggling to get hold of Bal Quickset Render, I got told by Tops that I could pick some up from Great Yarmouth.... I'm in Leeds. Does anyone know a similar product that could patch up and level a wall and be ready to tile onto in a couple of hours? Or other stores in Leeds...
Just had this email and thought it'd be handy for BAL users perhaps. :)
Up your game with BAL training
Spaces Available on our February Courses
At BAL we believe that quality workmanship is just as important as high quality products, which is why...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.