Hi All,
Haven't been on here for a while.
Due to a change in circumstances the Raimondi Tiling system and additional clips I purchased are no longer required.
They are brand new and unused. Purchased for just over £90, looking for £70 delivered.
Is there a general principal or will it be dependent on adhesive?
Whilst talking about adhesive, any recommendations. Don't want it to go off to quick, as I'm going to be really slow.
Hi All,
I decided to strip all of the old plasterboard off the walls in my bathroom (as opposed to overboarding) and will be installing new plasterboard.
I will be tanking the shower enclosure with the Bal WP1 kit.
I will be fitting 600mm x 300mm porcelain tiles. Do I need to prime the...
@NZ_Tiler Thanks for the reply.
That was going to be one of my next questions, how do you use the pliers and the wedges (we're going to have 10mm tiles). I've had a look and there doesnt seem to be any information.
Thanks
@3_fall Thanks for the detailed reply, and tips on what to look out for.
I'll go for the kit (which includes the floor pliers) and also purchase an additional 500 clips.
Hi All,
As I'm going to be embarking on my 1st ever tiling job (23 sqm) , I thought I'd better get a tile leveling system (My wife would kill me if I botch the job).
It seems that Raimondi is very well rated.
I've seen the following kit:
Kit RLS: Raimondi Levelling System -...
Can you recommend a tile cutter that will do the job that I require, i.e. Cut 600 x 300mm tiles?
Ideally I don't want to spend loads, as it will get very little use after this job.
Would an option be to hire a cutter for a day and aim to get all the cuts done in one day (don't know if this is...
It looks like we're going to be buying online.
I don't want to spend a lot of money, but it needs to get the job done.
The reviews for the above look okay, but I thought I'd check with the experts:)
Hi Everyone,
Thought I'd start another thread, rather than clutter my other 2 up! Which will hopefully be useful for any other newbies looking for advice.
Looking for a porcelain tile cutter that will cut the majority of tiles (approx. 600mm x 300mm x 10mm).
I appreciate I may need a wet...
Thanks all. The replies are really appreciated.
Overboarding it is then. I'll take a look at the various recommendations.
Have to say that the people on this forum are really helpful and friendly (unlike some other trade forums).
Hi @3_fall thanks for the prompt reply.
What does the PB refer to in point 1?
What effect does it being painted have, is it that the weight limit will be reduced by the weight of the paint?
Regarding our options assuming we're going to have 600 x 300mm tiles which will be over the weight...
Hi All,
We're currently looking at 600 x 300mm porcelain tiles for our bathroom. The majority of the room is currently painted skimmed plasterboard (which is attached to stud and exterior wall )
From reading other threads, it seems we may have some issue with the weight of the tiles?
Is there...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.