G
GoneGuy
That looks more work than wedge system with pliers.
Discuss News Raimondi in the Tile Tools | any Country any make any model area at TilersForums. The USA and UK Tiling Forum (Also now Aus, Canada, ROI, and more)
L
LM
That’s good to hear as for it’s use on porcelain I like the look of it.
L
LM
Wedges will scratch a vulnerable tile also so for me that concern is cancelled out whilst comparing to RLS. The winding out doesn’t seem to be that troublesome. Have you e er used that auzzy ATR system, now that’s what you call a pain in the arse for work load.
- Reaction score
- 13
Imagine cutting around a window and 3 taps in the same tile!!!!
- Reaction score
- 5,333
It cant cut a 120mm hole ? WC Shower valve ?
I
Italy
no......
I
Italy
I'm quite disappointed with this purchase.
1 problem: power raizor that vibrates, after 2 months I have not yet
had news if it's normal like that or not.
2 problem: the loading pistons of the suction cups,
if you place the bars vertically, they go out alone and fall into the ground.
answer from raimondi: impossible that they fall alone.
3 problem: the locking nut in the breaking clamp was missing.
I put it.
4 problem: the slides of the suckers pressure lancets
come out. (problem solved with glue).
I did not expect all these problems with raimondi, quite disappointed.
www.youtube.com/watch?v=R7JSIG9PA38
www.youtube.com/watch?v=8xvthFusklY
1 problem: power raizor that vibrates, after 2 months I have not yet
had news if it's normal like that or not.
2 problem: the loading pistons of the suction cups,
if you place the bars vertically, they go out alone and fall into the ground.
answer from raimondi: impossible that they fall alone.
3 problem: the locking nut in the breaking clamp was missing.
I put it.
4 problem: the slides of the suckers pressure lancets
come out. (problem solved with glue).
I did not expect all these problems with raimondi, quite disappointed.
www.youtube.com/watch?v=R7JSIG9PA38
www.youtube.com/watch?v=8xvthFusklY
Last edited by a moderator:
O
Old Mod
Antonio I found the power Raizor vibrates, it was reduced by always using spanner to tighten locking nut on blade, after a number of times using spanner, vibration decreases.
I then changed grinder, it was a mistake! began to vibrate again.
Vibration was decreased again by continually using spanner.
And now I have gone back to original grinder and I must decrease vibration again.
It is not a good solution, but it appears to work s little.
The main spindle that carries blade should lock in to housing to become more stable, alas it does not.
O
Old Mod
Your spindle Antonio does not seem true.
I
Italy
http://www.raimondispa.com/prodotti/novita-cersaie-2018-new-products-cersaie-2018/
alleluia, the last to publish the news in 2018
alleluia, the last to publish the news in 2018
- Reaction score
- 5,333
Hi Antonio. I know its not the thread. Do you know who manufactures this tile Urbe Fume Natural 3000x1000 6mm thick ? Sounds Spanish to me
- Reaction score
- 5,333
I
Italy
300x100 it should be kerlite, I'm going to check
- Reaction score
- 5,333
Thanks. I am dealing with Turkish people. They have said that the tile is their collection made in Italy
Reply to News Raimondi in the Tile Tools | any Country any make any model area at TilersForums.com
Or checkout our tile courses and training forum or the Tile Blog / Latest Blog Posts
There are similar tiling threads here
This website is hosted and managed by www.untoldmedia.co.uk. Creating content since 2001.
Share This Page
Tiling Tools
Find the cheapest price for both professional and DIY wall and floor tiling tools in the UK. Brands such as Rubi, Genesis, Fein, Karl Dahm, isomat, Schluter, Tilemaster and more.
New Tiling Questions
-
Natural Stone Limestone floor restoration- Started by AliGage
- Replies: 2
-
-
-
Shower former with drain - By TileBlog.co.uk- Started by Dan
- Replies: 0
-