ON this thread: Floor Tiling On Concrete - Several Questions About Floor Prep and Laying - https://www.tilersforums.com/threads/floor-tiling-on-concrete-several-questions-about-floor-prep-and-laying.87417/page-2#post-931307
I asked abuit how to level a row of engineering bricks that sit 2 to 3mm below the concrete floor. They are only 4 inches wide so I wasn't going to use a SLC but because I have 1 corner with a very small area that dips I might as well do the bricks and that area with SLC.
I went for
https://media.NoLinksToThis/is/image/ae235/Great%20Value%20Product_3?$miniIconProdPage$
https://media.NoLinksToThis/is/image//ae235?src=ae235/4377V_P&$prodImageThumb$
https://media.NoLinksToThis/is/image/ae235/?fmt=gif&wid=107&hei=50&op_sharpen=1&layer=0&size=107,50&layer=1&size=107,50&src=ae235/Mapei
MAPEI ULTIMATE LEVELLER 1210 SELF-LEVELLING FLOOR COMPOUND 20KG
at screwfix. This was £9.99 and the instructions say to use the Eco-T Primer which costs about £30. Is there a more generic primer that will do the job as I'm literally covering a surface area of about 0.5sqm so it seems steep to buy that primer.
I already have Benfer Prim to prime for the tile adhesive - perhaps that would work?
Thanks.
I asked abuit how to level a row of engineering bricks that sit 2 to 3mm below the concrete floor. They are only 4 inches wide so I wasn't going to use a SLC but because I have 1 corner with a very small area that dips I might as well do the bricks and that area with SLC.
I went for
https://media.NoLinksToThis/is/image/ae235/Great%20Value%20Product_3?$miniIconProdPage$
https://media.NoLinksToThis/is/image//ae235?src=ae235/4377V_P&$prodImageThumb$
https://media.NoLinksToThis/is/image/ae235/?fmt=gif&wid=107&hei=50&op_sharpen=1&layer=0&size=107,50&layer=1&size=107,50&src=ae235/Mapei
MAPEI ULTIMATE LEVELLER 1210 SELF-LEVELLING FLOOR COMPOUND 20KG
at screwfix. This was £9.99 and the instructions say to use the Eco-T Primer which costs about £30. Is there a more generic primer that will do the job as I'm literally covering a surface area of about 0.5sqm so it seems steep to buy that primer.
I already have Benfer Prim to prime for the tile adhesive - perhaps that would work?
Thanks.