Cordless angle grinder - Tile Advice

[Flintstone]

Has anyone got any experience of this machine ? Looks better than the older style DeWalt cordless grinders. 9000 rpm no load speed

DeWalt DCG405N 18V XR Brushless 125mm Angle Grinder (Body Only) 5035048665503 | eBay - https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F332346203832

 

[Bopster]

Mmm late pressie I think, I use the old 412 but with higher speed and brushless so more run time I’m in lol

 

[GoneGuy]

Make sure you get a minimum of 4amp battery for it

 

[Flintstone]

I've got 4ah batteries adey

 

[Wishiwasatoptiler]

If its this one, the only issue sometimes is you can mark the tile with the retaining plate. Other than that, its pretty good, maybe using 125mm blades might stop that but at the mo i only have 115mm in it.

 

[Bill]

View attachment 103461 View attachment 103462

If its this one, the only issue sometimes is you can mark the tile with the retaining plate. Other than that, its pretty good, maybe using 125mm blades might stop that but at the mo i only have 115mm in it.

I think you can buy an adapter that will stop the retaining nut from marking the tiles/stone.

 

[Waluigi]

Maybe the turorcut would stop this?

 

[Bill]

Maybe the turorcut would stop this?

tutorcut..... that is what I was thinking.

 

[GoneGuy]

View attachment 103461 View attachment 103462

If its this one, the only issue sometimes is you can mark the tile with the retaining plate. Other than that, its pretty good, maybe using 125mm blades might stop that but at the mo i only have 115mm in it.

If it’s the same grinder as mine I don’t think you can fit the tutor cut in there as the thread is too short

 

[Bill]

If it’s the same grinder as mine I don’t think you can fit the tutor cut in there as the thread is too short

even if you take the first nut off which the tutorcut replaces?

 

[GoneGuy]

even if you take the first nut off which the tutorcut replaces?

I think so, I tried it a few months ago.

 

[Flintstone]

Hmm what's different about this but Vs others

 

[GoneGuy]

even if you take the first nut off which the tutorcut replaces?

Tutorcut doesn’t fit my cordless grinder.
Some pics and measurements.
My grinder I think is an American model

 

[Wishiwasatoptiler]

Thats a good idea if it fits

 

[Wishiwasatoptiler]

Could that tutorcut be thinned some on a sander to make it fit, it says it 20mm thick