Make life easy, search the forum.

Discuss Recommended tile cutter / tools in the Tile Cutters area at TilersForums. USA and UK Tiling Forum

J

JON HUME

Please checkout the following advertisement.
Hi
New to tile and soon to be taking an NVQ course. I'm starting to think about what tools and kit I need and would like somebody who is in the know to give me a few pointers please.
Can somebody please advise me on the best tile cutter to purchase to get me on my way in my new trade and additionally any other general tool advice you can provide please?
Appreciate its quite a wide request, but all help appreciated.
Many thanks,
Jon
 
OP
Q

Qwerty

Welcome Jon

To be honest you will not get a definitive answer here. What you will get is a varied and very informative response of a number of time served tilers, which is fine but could be confusing. But below are my recommendations...

As @Andy Allen has recommended above, sigma would be my choice (what I have). A Sigma 3C3M is ideal as can cut all ceramics and porcelain.
A wet cutter is needed too...... again there are lots out there, but a Vitrex cutter would be my choice of first cutter.

Contact @Pro Tiler Tools and they will kit you out
 
OP
B

Blunt Tool

Would you not be better to attend the course first that way you can figure out what kind and how big of jobs you can commit to confidently to give a paying customer a professional job. This will give you an idea of a basic tool kit required that you can add to as you learn.
 
OP
J

JON HUME

Welcome Jon

To be honest you will not get a definitive answer here. What you will get is a varied and very informative response of a number of time served tilers, which is fine but could be confusing. But below are my recommendations...

As @Andy Allen has recommended above, sigma would be my choice (what I have). A Sigma 3C3M is ideal as can cut all ceramics and porcelain.
A wet cutter is needed too...... again there are lots out there, but a Vitrex cutter would be my choice of first cutter.

Contact @Pro Tiler Tools and they will kit you out


Thanks, appreciate your advice and experience.
 
OP
J

JON HUME

Would you not be better to attend the course first that way you can figure out what kind and how big of jobs you can commit to confidently to give a paying customer a professional job. This will give you an idea of a basic tool kit required that you can add to as you learn.

Thanks, I want to build up a basic tool kit and then add to it as my experience allows. I need to get a tile cutter and a wet cutter to do anything so was just seeking some guidance.
 
OP
G

GoneGuy

It all depends on your budget as well,
as new professional tools can be very expensive.
Everyone on the forum uses different brands of tools which effectively do the same job.
 
OP
O

One Day

Get the best you can afford and look after them.
It's cheaper in the medium to long term.
(and makes work more enjoyable)

My recommendations:
Sigma 3c3m will cut everything, inc' mosaics.
A decent grinder (I favour Makita) and a couple of quality blades.
A basic wet saw, vitrex (screwfix) or norton (CTD)
Set of levels (laser level not really essential but nice to have)
Stainless trowels - 6/8/10mm
Bucket trowel and gorilla tubs / BAL mixing buckets
A selection of diamond core drill bits (cheapies off Amazon will do to start)
Safety kit - specs, ear plugs, dust masks, knee pads
A decent DAB radio (essential in my opinion!)
Pencils, chinagraphs, sharpies, and a basic tool set
 
OP
J

JON HUME

Get the best you can afford and look after them.
It's cheaper in the medium to long term.
(and makes work more enjoyable)

My recommendations:
Sigma 3c3m will cut everything, inc' mosaics.
A decent grinder (I favour Makita) and a couple of quality blades.
A basic wet saw, vitrex (screwfix) or norton (CTD)
Set of levels (laser level not really essential but nice to have)
Stainless trowels - 6/8/10mm
Bucket trowel and gorilla tubs / BAL mixing buckets
A selection of diamond core drill bits (cheapies off Amazon will do to start)
Safety kit - specs, ear plugs, dust masks, knee pads
A decent DAB radio (essential in my opinion!)
Pencils, chinagraphs, sharpies, and a basic tool set

Thanks Impish, that's just the response I was hoping for. Cheers
 
OP
J

JON HUME

Morning, I've picked myself up a Rubi TR 600S but am totally confused as to what wet saw to pick up.
I've had a look at Rubi and Vitrex but so many differing reviews its really hard to work out what I need.
Should I go with a wet saw with legs such as the Rubi DU 200 or Vitrex 800?
Or should I go for a Vitrex Pro 750 or Rubi ND 180 as most of my cuts will be with the Rubi ?
All your advice massively appreciated.
Thanks
Jon
 
OP
L

LM

Morning, I've picked myself up a Rubi TR 600S but am totally confused as to what wet saw to pick up.
I've had a look at Rubi and Vitrex but so many differing reviews its really hard to work out what I need.
Should I go with a wet saw with legs such as the Rubi DU 200 or Vitrex 800?
Or should I go for a Vitrex Pro 750 or Rubi ND 180 as most of my cuts will be with the Rubi ?
All your advice massively appreciated.
Thanks
Jon
What's your budget Jon?
 

Reply to Recommended tile cutter / tools in the Tile Cutters area at TilersForums.com

Or checkout our tile training advice or the Tile Standards

This website is hosted and managed by www.untoldmedia.co.uk. Creating content since 2001.

New Tiling Questions

UK Tiling Forum Stats

Threads
66,601
Messages
866,708
Members
9,513
Latest member
05jtaylor
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock