Make life easy, search the forum.

Discuss Raimondi Tile Leveling System in the DIY Tiling Forum area at TilersForums. USA and UK Tiling Forum

O

Old Mod

Please checkout the following advertisement.
The clip goes underneath two tiles.
To set tension you can take two loose tiles place them on floor and insert wedge through the protruding clip opening.
The rubber covered front feet are placed on the far side of the clip as you look at it and the metal foot pushes the wedge through the clip from behind.
Squeeze pliers until wedge is held firmly by the clip against the tiles. Squeeze too hard and the clip will break away from the base, which is what they're designed to do.
There is a thumbscrew on the pliers, set this to a point where no matter how hard you squeeze it prevents the pliers from snapping the clip.
It'll probably take a couple of attempts to get it right, hence practising on loose tiles first.
 
G

GoneGuy

I use the RLS system and find it very good to use, I usually hold the tile in place with one hand and use other hand to operate the pliers to prevent the tile from moving,
 

aytiling

TF
Arms
Reaction score
60
OK I gotta step in here (Red Wine night) I've tried these clips on a a few occasions now and have thrown the rest in the bin. From my perspective all they do is lift the uneven tile up, so creating a void.
Lets face it, its easier to lift up than push down with these clips, and if using a 5mm notched trowel you have to lift the tile in the bed to get the clip under, thus creating the void to start with.
 
O

Old Mod

OK I gotta step in here (Red Wine night) I've tried these clips on a a few occasions now and have thrown the rest in the bin. From my perspective all they do is lift the uneven tile up, so creating a void.
Lets face it, its easier to lift up than push down with these clips, and if using a 5mm notched trowel you have to lift the tile in the bed to get the clip under, thus creating the void to start with.
Well if you're using a 5mm trowel you're not gonna achieve a full bed anyway.
And if they're lifting tiles, the tile you've already laid, isn't laid correctly.
There is NO way, a clip is strong enough to lift a fully bedded tile. And I don't care what you say, it's just not happening.
 

aytiling

TF
Arms
Reaction score
60
Well if you're using a 5mm trowel you're not gonna achieve a full bed anyway.
And if they're lifting tiles, the tile you've already laid, isn't laid correctly.
There is NO way, a clip is strong enough to lift a fully bedded tile. And I don't care what you say, it's just not happening.
Of course I have no idea what I'm talking about. I might as well train to do something else because in 45 years of doing this job I haven't learned the basics yet
 
O

Old Mod

Of course I have no idea what I'm talking about. I might as well train to do something else because in 45 years of doing this job I haven't learned the basics yet
Not quite what I suggested, but I'll apologise for sounding off on you.
I'm sorry.
 
G

GoneGuy

OK I gotta step in here (Red Wine night) I've tried these clips on a a few occasions now and have thrown the rest in the bin. From my perspective all they do is lift the uneven tile up, so creating a void.
Lets face it, its easier to lift up than push down with these clips, and if using a 5mm notched trowel you have to lift the tile in the bed to get the clip under, thus creating the void to start with.
I use them on floors, using 10mm - 12mm notched trowel minimum so there is a fairly sized bed of https://www.tilersforums.com/forums/tile-adhesive/ and back butter the tile as advised by rls, and I always check do voids and add extra https://www.tilersforums.com/forums/tile-adhesive/ where needed.
 

Kyle Knowles

TF
Arms
Reaction score
1,050
OK I gotta step in here (Red Wine night) I've tried these clips on a a few occasions now and have thrown the rest in the bin. From my perspective all they do is lift the uneven tile up, so creating a void.
Lets face it, its easier to lift up than push down with these clips, and if using a 5mm notched trowel you have to lift the tile in the bed to get the clip under, thus creating the void to start with.
Who in the rite mind uses a 5mm trowel with a tile big enough to need a leveling system anyway? ????
 
W

WetSaw

Lets face it, its easier to lift up than push down with these clips, and if using a 5mm notched trowel you have to lift the tile in the bed to get the clip under, thus creating the void to start with.

As others with far more experience than me have said, if the tile is bedded correctly a plastic clip (that is designed to break) is unlikely to lift a tile. Were you using the type with the curved base? Clearly they need more room to initially insert under the tile and aren't as good,IMHO, as the flat base type.
 
D

Dumbo

5mm trowel on floor not sure about that .
Min I've used on floor on any tile tile over 300 square is 10 mm
 
A

AT&S

Raimondi or other levelling clips will leave you with hollow badly fixed tiles as likely as not if not done correctly.

My honest opinion is that they are a tool for professionals not a tool that lets DIY'ers (irrespective of competence) become tilers.

As for a 5mm trowel. no way.

I only used a tiger tooth trowel with these, created a (45deg L shape) folded notch of https://www.tilersforums.com/forums/tile-adhesive/ and this is applied to tile and surface. As such should the tile lift slightly the https://www.tilersforums.com/forums/tile-adhesive/ can still provide full coverage.

http://www.trimlinegroup.com/media/...9df78eab33525d08d6e5fb8d27136e95/1/3/1356.png

Hard to describe this with pictures but put your fists together knuckle to knuckle as if they are https://www.tilersforums.com/forums/tile-adhesive/ touching from tile and say floor, you pull your fists apart 5mm and you have a 5mm gap. Do the same but extend your fingers (your knuckles and finger nails on opposing hands are touching, pull your knuckles 5mm apart and most of your fingers are still touching. Thats the best analogy I can think off.

RLS are not a magic wand, and do not solve uneven substrate issues.

Oh, and should you use it, the yellow pliers are on ebay for about ÂŁ4 and are just as good as the raimondi ones.

Best of luck.
 

Simons70

TF
Esteemed
Arms
Reaction score
609
Of course I have no idea what I'm talking about. I might as well train to do something else because in 45 years of doing this job I haven't learned the basics yet
IMO is better to do something else.With 5 mm trowel you can't even try to use clips,you need at lest 3 mm full bed https://www.tilersforums.com/forums/tile-adhesive/ for.If you try to use clips on metro tiles or 200x200 biscuit tiles I really doubt about yours 45 years on this job.I have just 32 or 33 years on tools and I still ask and learn...
 
Last edited:

Reply to Raimondi Tile Leveling System in the DIY Tiling Forum area at TilersForums.com

Or checkout our tile training advice or the Tile Standards

This website is hosted and managed by www.untoldmedia.co.uk. Creating content since 2001.

New Tiling Questions

UK Tiling Forum Stats

Threads
66,600
Messages
866,701
Members
9,511
Latest member
mmcdon47
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock