Simple way to mitre a tile..................Mitre Wiz

**Mitre Wiz** · 08-02-2012

Hi Guys,

Thanks for all of your previous feedback it has really helped since i was last on here. Mitre Wiz is an attchment that will go on any grinder that makes the skill of mitring a tile very simple. Since i was on here last we have been working hard on making the tool safer, faster and simpler. Many thanks to those replies last time your feedback was very valuable and improvements were made from your constructive criticism. We have recently done a couple of new videos and have upgraded the tool itself. Would be great if you guys could again have a look and tell me what you all think. Not far off release and will arrange some samples through this forum.

Perfect Mitre Edges in Seconds with The Mitre Wiz - YouTube

The Mitre Wiz is making cutting simple! - YouTube

Once again thanks for your time and feedback

**MissTiler** · 08-02-2012

If it works as well and as easy as in the vids I would get one. What sort of price would it sell for?

missyT

**Mitre Wiz** · 08-02-2012

Hi there,

Thanks for your reply. You will be so impressed how easy it is too use certainly does work as well as the video suggests. It def helps to have quality continuous diamond blade but it is so simple. . Do you do a lot of mitring or do you tend too use trim. Check this video out and it gives you a better idea of how quick and easy it is......

The Mitre Wiz in action. - YouTube

Thanks again

cheers

**garretridge** · 09-02-2012

looks good nice and simple idea but like anything it will depend on price if it takes of or not!

**timeless john** · 09-02-2012

I don't think that the price should be a deciding factor on it's benefits. In my opinion the sooner plastic trim is outlawed from the professional market the stronger the reputation a tiling contractor will gain.
There is no substitute for a perfect mitred edge and the additional time taken to provide a continuous surface of tile is to be admired.

**kilty55** · 09-02-2012

like the look of this

**Wingn** · 09-02-2012

Like the improvement of the the blade held downwards rather than pointing towards the user. Are they ready for manufacture yet?

Wonder how long the guide would last before it would need replaced? Would be willing to pay £15/20 for one.

**tommyzooom** · 09-02-2012

I have to agree, it looks much safer than the 1st prototype we saw earlier.
Interesting to see how it performs onsite in a real test or review
It certainly looks promising

**Rich** · 09-02-2012

Does look good but for me price would defiantly be a factor.

**deanotile** · 09-02-2012

Winner Winner chicken diner I will put my order in now just let me know when I can have one

**blocko** · 09-02-2012

Gimme gimme gimme

CJ · 09-02-2012

If you'd send me one then I can test it and report back.

**kendo1** · 09-02-2012

Looks good, depends on price to some extent.
I still think the name is naff. Sounds like something from JML.

**pjc** · 10-02-2012

great idea not to sure about the quality of the mitre but its difficult to see that from the video but would be good for diy

**Dan** · 10-02-2012

The video is a bit JMLish too.

I like the idea of it though. I'd be interested to know what sort of price bracket it'll be aimed for.

**wilson.roy** · 10-02-2012

Looks like a cracking piece of kit, how would you go about buying one???

**Sir Ramic** · 10-02-2012

Originally Posted by wilson.roy

Looks like a cracking piece of kit, how would you go about buying one???

They are not in production as yet I believe.

**wilson.roy** · 10-02-2012

Shame, should do well if priced right

**Tregah** · 10-02-2012

Looks good, I've checked the WWW. without much like on cost!

**Sir Ramic** · 10-02-2012

It seems to be getting a favourable response, now if we could manage to get a few sample then we could give it a road test.

**Rich** · 11-02-2012

Now that is a good idea Neale

**jindru** · 11-02-2012

the idea is excellent.but for the professional tiler it will stand or fall on the quality of the finished mitre.price is not the issue unless its marketed for the diys.i tried many chop saws in the past but in the end had to pay for a real flip over to get a decent joint in timber,so the same applies in tiling. quality costs but we seek pefection(dont we?)

**Alan M** · 11-02-2012

i agree with jindru. quality has to be there first . the price isnt that important. how many here have a festool , ye all know that quality of tool and quality of job done matter more than price. id like to see it made from stainless, derlin, or aircraft grade aluminium anadised

**kendo1** · 11-02-2012

Originally Posted by Alan M

i agree with jindru. quality has to be there first . the price isnt that important. how many here have a festool , ye all know that quality of tool and quality of job done matter more than price. id like to see it made from stainless, derlin, or aircraft grade aluminium anadised

Indeed. Why not a product for DIY and a product for professionals?

**jay** · 11-02-2012

Looks like a good idea but just wondering if the plate that glides over the face of the tile may if dust got between the surface cause scratching to some tiles esp with the fine vibration from the grinder
but a good idea

**Alan M** · 11-02-2012

maybe that could be a problem. if you got some 1mm thick flexible low friction mat to lay in between

**jay** · 11-02-2012

Think the only way to eliminate the possible prob with the guide is to have the guide run on the back of the tile but that's a complete redesign it might not be an issue

**Mitre Wiz** · 11-02-2012

Hi Guys,
Thanks for all the comments so far...... been a few different opinions and questions so i will try and answer them for you.
We intend to price the mitre wiz well enough so that both diy and tilers will want and afford to give it a go. Having 1 made for diyers and a separate commercial 1 for a tiler is an option. However the material that we are currently looking at to make it with (30% glass filled plastic) should last even the tiler years of use. I realise that some tilers prefer trim over mitres as it protects the edges and some feel it leave it looking professional and mitres can be difficult and time consuming. We have designed the mitre wiz with that in mind so it leaves enough biscuit of the tile to make the joint strong and professional (2mm) that only takes approx secs to cut. I am confident that once it comes to market even the most objective tilers to mitres will be impressed enough to have one in their tool box. (with time) Have even tested it with people that have never picked up a grinder and have got it right the first time. Talking to a lot of people on this topic mitre or trim one of the main probs with trim is it dates a long time befor the tiling. As far as scratching the glazed surface it hasnt been a problem as the majority of dust and grit is blown downwards by the grinder. Mitre or trim is a common argument by tilers and both have a place in the profession. Not trying to compete or replace trim just trying to make mitring much easier, safer and ultimately faster so that it will be a simpler option for those that dont have a wet saw or cant do it by eye with a grinder. I ask those that prefer trim have you needed to mitre at some stage over the last 12 months? If you knew mitring was a simpleand much faster task that left the your job with a strong professional edge that cost no extra (trim costs) would you consider going back to mitring? Thanks for your time app it.......
Troy MD Mitre Wiz

**widler** · 12-02-2012

i think trim has a place in tiling,looks better on some tiles than mitring,but this looks good

**MissTiler** · 26-02-2012

can always put some masking tape on the tile to stop any possible scratching. Would deffo want one

Simple way to mitre a tile..................Mitre Wiz

The Following 2 Users Say Thank You to Mitre Wiz For This Useful Post:

Re: Simple way to mitre a tile..................Mitre Wiz

The Following User Says Thank You to MissTiler For This Useful Post:

Re: Simple way to mitre a tile..................Mitre Wiz

The Following User Says Thank You to Mitre Wiz For This Useful Post:

Re: Simple way to mitre a tile..................Mitre Wiz

The Following User Says Thank You to garretridge For This Useful Post:

Re: Simple way to mitre a tile..................Mitre Wiz

The Following 2 Users Say Thank You to timeless john For This Useful Post:

Re: Simple way to mitre a tile..................Mitre Wiz

The Following User Says Thank You to kilty55 For This Useful Post:

Re: Simple way to mitre a tile..................Mitre Wiz

The Following User Says Thank You to Wingn For This Useful Post:

Re: Simple way to mitre a tile..................Mitre Wiz

The Following User Says Thank You to tommyzooom For This Useful Post:

Re: Simple way to mitre a tile..................Mitre Wiz

The Following User Says Thank You to Rich For This Useful Post:

Re: Simple way to mitre a tile..................Mitre Wiz

The Following User Says Thank You to deanotile For This Useful Post:

Re: Simple way to mitre a tile..................Mitre Wiz

The Following User Says Thank You to blocko For This Useful Post:

Re: Simple way to mitre a tile..................Mitre Wiz

The Following User Says Thank You to CJ For This Useful Post:

Re: Simple way to mitre a tile..................Mitre Wiz

The Following User Says Thank You to kendo1 For This Useful Post:

Re: Simple way to mitre a tile..................Mitre Wiz

The Following User Says Thank You to pjc For This Useful Post:

Re: Simple way to mitre a tile..................Mitre Wiz

The Following User Says Thank You to Dan For This Useful Post:

Re: Simple way to mitre a tile..................Mitre Wiz

The Following User Says Thank You to wilson.roy For This Useful Post:

Re: Simple way to mitre a tile..................Mitre Wiz

The Following User Says Thank You to Sir Ramic For This Useful Post:

Re: Simple way to mitre a tile..................Mitre Wiz

The Following User Says Thank You to wilson.roy For This Useful Post:

Re: Simple way to mitre a tile..................Mitre Wiz

Re: Simple way to mitre a tile..................Mitre Wiz

The Following User Says Thank You to Sir Ramic For This Useful Post:

Re: Simple way to mitre a tile..................Mitre Wiz

The Following User Says Thank You to Rich For This Useful Post:

Re: Simple way to mitre a tile..................Mitre Wiz

Re: Simple way to mitre a tile..................Mitre Wiz

The Following User Says Thank You to Alan M For This Useful Post:

Re: Simple way to mitre a tile..................Mitre Wiz

The Following User Says Thank You to kendo1 For This Useful Post:

Re: Simple way to mitre a tile..................Mitre Wiz

The Following User Says Thank You to jay For This Useful Post:

Re: Simple way to mitre a tile..................Mitre Wiz

The Following User Says Thank You to Alan M For This Useful Post:

Re: Simple way to mitre a tile..................Mitre Wiz

The Following User Says Thank You to jay For This Useful Post:

Re: Simple way to mitre a tile..................Mitre Wiz

Re: Simple way to mitre a tile..................Mitre Wiz

Re: Simple way to mitre a tile..................Mitre Wiz

Similar Threads

Visitors found this page by searching for:

mitre wizz

mitring tiles

mitre tiles

Mitre Wiz how much does it cost

mitre wiz reviews tiling

how to mitre tiles

tile miter joint cost

i need to mitre tiles

mitre wiz

mitre joining a tile

tile mitre video

tile mitre

mitre wiz price

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions