GazTech

FRET SAW....Arched back frame and fine toothed blade,enabled this saw to cut very accurate curves and designs,some fretwork can be stunning and well sought after.

"The bitterness of poor quality remains long after the sweetness of low price is forgotten"

Dave

FAULT FINDER.....detecting electrical faults etc...........dave..

Dave

FLOORING SAW...These tend not to be found in the tool kit of most DIY people as it is somewhat of a specialist saw being used only to cut across floorboards so that they can be lifted. The edge is curved, enabling a cut to be made across a board at the centre of a joist. When the blade has penetrated, the straight part comes into use, the end of the saw being narrow enough to enable it to enter a short cut.

Dave

FINISHING TROWEL... used to float concrete screeds etc.........dave..

Dave

FEATHER EDGE...Combined straight edge and feather edge used by plasterers to flatten plastered walls..........dave..

Dave

FILE...( diamond grit )....used to file tile edges smooth...........dave..

Dave

FOAM ROLLER....Used to apply sealant to natural stones tiles.. or to apply gloss to doors etc......dave...

GazTech

FLAME GUN.. is the most effective form of organic weed control available! This flame gun destroys weeds with a searing 2000 degrees Fahrenheit blast which when directed at the base of weeds stops the plants sap rising. Leaving the weeds to dry for a few days, a second gunning incinerates all top growth and weed seeds, leaving a potash rich residue. The Flame Gun not only destroys weeds but leaves the ground pure, sweet and free from seeds and harmful bacteria - perfect for future planting.Also useful for mealting snow and ice from drives and pathways during Winter months.

"The bitterness of poor quality remains long after the sweetness of low price is forgotten"

GazTech

FILLING KNIFE... The decorators tool for filling cracks in woodwork,patching up plaster etc

"The bitterness of poor quality remains long after the sweetness of low price is forgotten"

GazTech

FIRMER CHISEL or GOUGE... A chisel, thin in proportion to its width. It has a tang to enter the handle instead of a socket for receiving it.

"The bitterness of poor quality remains long after the sweetness of low price is forgotten"

GazTech

FLOAT... a hand tool with a flat face used for smoothing and finishing the surface of plaster, cement or stucco.

"The bitterness of poor quality remains long after the sweetness of low price is forgotten"

GazTech

FOOTPRINT WRENCH... The jaw opening can be adjusted by lifting the moveable handle and re- positioning the pivot so that the wrench can be used on a number of pipe sizes. Pressure is applied by squeezing the two handles together.

"The bitterness of poor quality remains long after the sweetness of low price is forgotten"