GazTech

GazTech

CIRCULAR SAW...Great for reducing doors and kitchen plinths.
CIRCLIP-PLIERS...Pliers with a round bar at the end of each jaw that fit in the holes of a circleclip so that it may be sprung open to fit or remove from the workpiece.

"The bitterness of poor quality remains long after the sweetness of low price is forgotten"

GazTech

CLAW HAMMER..The claw is engineered to withdraw nails from timber or for use as a prise bar.
CRAFT KNIFE...A lightweight utility knife,developed as a heavy duty scalpel used by model makers and the like.

"The bitterness of poor quality remains long after the sweetness of low price is forgotten"

Dave

CARBIIDE HOLE SAW.....used to cut holes in cast iron---ceramic tiles---mdf----plasterboard..etc........dave..

Dave

CROWBAR, also called a pry bar or prybar, or more informally known as a 'jemmy' or 'jemmy bar' is a tool consisting of a metal bar with a single curved end and flattened points, often with a small fissure on the curved end for removing nails. It is used as a lever to either force apart two objects or to remove nails. Crowbars are commonly used to open nailed wooden boxes. Another common use for larger crowbars is general demolition: for removing nails, prying apart boards, and generally smashing things. It has also been used as a weapon in hold ups.............dave..

Dave

CHISEL BITS...used in your sds hammer drill to chase recesses for pipes or cables or using spade chisel to remove tiles etc..........dave..

Dave

CLUB HAMMER..ideal accompaniment to the bolster chisel........extra striking force.........dave..

Dave

CHOP SAW.... essentially a lightweight circular saw mounted on a spring-loaded pivoting arm, and supported by a metal base. Chop saws are considered the best saw to get very exact, square cuts. Compound miter saws have been developed due to the limited cutting capacity of the chop saw. These are basically chop saws that can make bevel cuts as well as miter cuts.......dave..

Dave

CROSSCUT SAW..is a saw that is specially designed for making crosscuts. A crosscut is a cut made horizontally through the trunk of a standing tree, but the term also applies to cutting free timber.
Crosscut saws have teeth that are designed to cut wood at a right angle to the direction of the wood grain. The cutting edge of each tooth is angled back and has a beveled edge.

..........dave..

Dave

CHAINSAW....(also spelled chain saw) is a portable mechanical, motorized saw. It is most commonly used in logging activities such as felling, delimbing, and bucking; by tree surgeons to fell trees and remove branches and foliage; to fell snags and assist in cutting firebreaks in wildland fire suppression, and to harvest firewood. Chainsaws with specially designed blades have been developed as tools for use in chainsaw art...........dave..

GazTech

COLD CHISEL...A chisel made of hardened, tempered steel for cutting cold metal....or more often in brickwork for breaking or cleaving masonary.

"The bitterness of poor quality remains long after the sweetness of low price is forgotten"

GazTech

COMPASS SAW.....A handsaw with a narrow blade for making curved cuts.

"The bitterness of poor quality remains long after the sweetness of low price is forgotten"