Just laid approx 200 sq mts 15mm thick black double layered porcelain 1000x 1000mm.
Used a variety of blades to cut inc macist porcelain blade, but all of these made hard work work cutting and chipped cut edge to certain degrees.

Have now just tried out the montolit dna blade and it just unbelievable.
virtually no visible chips, cuts twice as fast.
I was even able to cut a 1000mm long strip only 4mm thick without breaking.
it is more expensive than usual good quality blades but apparently lasts a lot longer.

I have 150 lin mts skirtings to cut monday and will let you know how much wear and how long it took.
Dave at Tradetiler sourced this for me and I believe he is going to stock this.

Thanks Jonny,

We have been testing them and have also been amazed

Just getting them up on the web site.

will post the link as soon as they are on

Nice one David Any news on more Montolit machines becoming available....the Sigma is starting to need a refurb

we have just a few pallets into stock

more 24's & 63-P2's

some 43's, 75-P2's 125-P2's

DNA blades in 180, 200, 230, 250, 300mm

some electric machines lasers etc

just put diamond pads on

Thanks for the review and info but I have to ask why you needed a 4mm strip

Originally Posted by jonnyc

I was even able to cut a 1000mm long strip only 4mm thick without breaking.

OK got the new Montolit DNA wheels on board now

More pictures to follow- OK, they are epensive but worth it






TradeTiler.Ltd Montolit Diamond Wheels

David "Yes they are expencive - But you get what you pay foor"
EXPENSIVE FOR

Looking at another 200 blade, might bite the bullet for one

Originally Posted by Sir Ramic

David "Yes they are expencive - But you get what you pay foor"
EXPENSIVE FOR

oops

better get that fixed

OK use the coupon code 'DNA5' to get a 5% discount on any DNA blades


NO don't bother trying DNA10 or DNA20... etc they won't work

alan
i did not need to cut a 4mm strip 1000mm long for the job.
i simply did it to see how well the blade cut.
try it yourself with any blade and any tile and you will know how good this blade is.
the cut through depth of tile was so good , i would not even have to polish it even if it was the top edge of a skirting tile i wished to make.

Originally Posted by jonnyc

alan
i did not need to cut a 4mm strip 1000mm long for the job.
i simply did it to see how well the blade cut.
try it yourself with any blade and any tile and you will know how good this blade is.
the cut through depth of tile was so good , i would not even have to polish it even if it was the top edge of a skirting tile i wished to make.

I did wonder, sounds like a winner in my book

Well if Trade tiler want to send me one for the Dewalt i will do a comparison between standard Dewalt. Rubi CPC and the DNA wheel......all for the good of the forum you understand

Of course Mr quality control