Hi

Been given an old TR600 that was in a right state Anyway, I have cleaned it up a treat. Thing is the main base and rails are good nick, but the cutter/snapper head are a bit slack and I cannot tighten these up.

Is it poss to get an old type cutter/snapper on its own?????

Maybe Neil at BB Tools or Dave at Trade Tiler could help? again

Originally Posted by CJ again

Hi

Been given an old TR600 that was in a right state Anyway, I have cleaned it up a treat. Thing is the main base and rails are good nick, but the cutter/snapper head are a bit slack and I cannot tighten these up.

Is it poss to get an old type cutter/snapper on its own?????

Maybe Neil at BB Tools could help? again

Try dave/tradetiler..he does rubi spares.....

Has anybody got one?

I took it apart to give it a good clean..........but I don't think I have put it back together right

Could do with a picture of the main head of it to check I have it right


ANYBODY

Originally Posted by CJ again

Has anybody got one?

I took it apart to give it a good clean..........but I don't think I have put it back together right

Could do with a picture of the main head of it to check I have it right


ANYBODY

dope....................

Originally Posted by CJ again

..........but I don't think I have put it back together right

Your like my grandad CJ, he takes things apart to repair them, and ends up with a pile of bits left over when he's put it back together, which he then looks at, and says, there all extra bits in there to push up the price, there not really needed, he then chucks them in the bin .

Originally Posted by Oli

Your like my grandad CJ, he takes things apart to repair them, and ends up with a pile of bits left over when he's put it back together, which he then looks at, and says, there all extra bits in there to push up the price, there not really needed, he then chucks them in the bin .

First of all............Cheeky Git

And then..........I got no bits left over...........they are all on there, but just not sure if they are in the right place


COULD DO WITH A PICTURE THOUGH

Originally Posted by CJ again

First of all............Cheeky Git

And then..........I got no bits left over...........they are all on there, but just not sure if they are in the right place


COULD DO WITH A PICTURE THOUGH

Sorry mate didnt mean to take the p**s

Here you go....

All i can find cj is these close up pics....ones the tr series and the other the tx series but the breaker is the same anyway..

http://www.rubi.com/opuscles/trtr-s-d.pdf

http://www.rubi.com/opuscles/TX-DORSO.PDF

.....

A close up from the side if poss

Cheers Dave............I did look at the rubi site.......but the old eyesite isn't as good as it used to be..........need a close up

Originally Posted by CJ again

A close up from the side if poss

Cheers Dave............I did look at the rubi site.......but the old eyesite isn't as good as it used to be..........need a close up

If you can hang on till t/moz i will take a close up pic of my TR for ya..

side on you say...?.

Originally Posted by Dave

If you can hang on till t/moz i will take a close up pic of my TR for ya..

side on you say...?.

Missed this

Yes plz Dave..........Side on pic of the cutting head

Although I was testing it tonight............it still worked on a 10mm hefty porcelain tile I had kicking about.........bars did bend a wee bit

Will take pic t/moz cj....will be using my tx all week and its the same breaker head....