sills & window reveals - TilersForums.co.uk | Tile Forums

cutmore · 19-03-2008

hi lads & lasses,iam seriously struggling with my reveals & sills.i want too be spott on with them .my tend to be to small not exacly straight or level .Also my miters.need some good exspaert advice.

GazTech · 19-03-2008

If you think of each 4 sides of the window like a cill, then apply same method like this.Tile the face of the wall all around the window with full tiles...leave out the cuts around the opening. Always use spirit level and straight edges to get the tiles around the window straight and flush. On the cill, measure the cut to the high point including a spacer, then cut all the tiles to this bigger size, the same applies to a reveal left right or top.You can either use rapid to build flush where it sits down behind tile, or build up with the tile in rapid when fixing inside the window......Gaz