How would you do it ?

[Leatherface]

I am very curious as to the training methods on some of these courses & how they equip new tilers to deal with certain situations.

Take this job for example..
I am in the process of quoting a kitchen & dining room floor in an old house. Approx 20 sq metres. Limestone tiles over UFH. Tiles are 22 mm thick.
Only problem is that the room slopes downwards and to either side away from the kitchen and down towards the front door and main radiator bleed valve.
As it is good practice to lay a coat of self levelling compound over the UFH mat, it looks very likely that after laying the mat ,a coat or 2 of self leveller ( which will be deep in the lowest area ) and also the 22mm tiles and adhesive, the customer may have to have her door seriously altered & also her radiator.
My question is - how would any of you newly trained tilers tell the customer how much her floor will need to rise at the lowest point & also tell her where the lowest points are ?

Easy Peasy

[Leatherface]

Keep it to yourself then mate.
Just interested to hear how the newbies go on

[Dan]

oooOOooo - I want to answer this!

[Leatherface]

Steady on there Dan, that's like the teacher answering his pupils homework questions.
Did it today - the floor was 290mm out from Highest to lowest point.
Customer is having a re-think - no UFH now - just tile kitchen area.

[wivers]

I have never been trained to deal with this nor have i ever had to face this problem thankfully, so as a NooB i would probably try and find the highest point of the floor and then try running a level line around the room from that highest point so i could visually see how much the floor was out ....... whay do i feel like a school boy putting his hand up to answer a question and waiting for the other students to laugh at the answer?!!!

[sparky]

how about putting a level line all the way round the room then measure from floor up to the line if there is a difference then thats how much the floor will be running out

There is a quicker way.... Not as accurate but good for estimating and showing the customer....

[wivers]

roll a ball along the floor

[Dan]

How come due to the heights the customer isn't having underfloor heating now? What difference does that make?

Probably raises his floor too much against the adjoing floor i guess?

[sparky]

Originally Posted by sparky

how about putting a level line all the way round the room then measure from floor up to the line if there is a difference then thats how much the floor will be running out

not bad for a 5 day tiler though eh the quicker way would it involve a staff by any chance